| From | Message |
JONNY
Dodge Dakota
JOIN HERE
9/19/2003
17:08:47
|
 Subject: home made sub box
IP: Logged
Message:
I was wondering if anyone has specific plans for building a box to fit under the rear bench and house two 10"s. I have built boxes before, but am looking to save myself the trouble of creating my own design. Thanks.
|
Nate
Dodge Dakota
JOIN HERE
9/24/2003
08:20:12
|  RE: home made sub box
IP: Logged
Message:
I built a custom sub box for my 99 Ext Cab to fit snugly under the rear bench and hold two subs and an amp.
I built two cups to sit on the left and the right, each which holds a sub. There is a platform between them for mounting an amp. I had plenty of space left to put a little divider so I can throw some hand tools back there, too. It was not easy to cut all those angles, plus I had to tilt the top down in the back to get the bench to lay flat (the cups had to be a certain depth to prevent the subs from bottoming out).
If this sounds like something you like, I can take 10 minutes to draw a plan of what I did, but ultimately you'd have to change all the measurements anyway. I have two 8's and a smallish 100 W amp, compared to your 10's. For what it's worth, my design could easily be modified to fit the 10's and their optimal enclosed volume and still fit an amp under there.
Nate
|
Nate
Dodge Dakota
JOIN HERE
9/24/2003
08:37:10
| RE: home made sub box
IP: Logged
Message:
Forgot... email is neeltgen@yahoo.com!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
