| From | Message |
2ndDak
Dodge Dakota
JOIN HERE
9/16/2003
23:29:06
|
 Subject: wiring question
IP: Logged
Message:
Ok here goes, I have a jvc cass deck w/ changer controls hooked to 12 disc changer. I bought a 4 chanel pioneer amp that can be bridged to 3 chanels and i have a 10" polk 4ohm sub. I see how to run the outputs but on the inputs do i just need to run 2 channels in? I want to run the 2 front speakers and the sub off the amp and the rears from the tape deck. thanx in advance drew.
|
JMII
Dodge Dakota
JOIN HERE
9/17/2003
11:57:21
|  RE: wiring question
IP: Logged
Message:
You can run just 2 channels in if the amp has a built in crossover, if not you'll need a 2-way active crossover (Audio Control 2XS is a good one) then use it to split the bass and highs before the amp. Wire the rears to the deck as normal by-passing the amp completely.
That's the same way my system is wired except my Clarion active crossover also has an EQ and DSP functions built in.
- John
http://www.blueoceanpress.com/~storage/truck/index.html
|
2ndDak
Dodge Dakota
JOIN HERE
9/17/2003
18:15:17
| RE: wiring question
IP: Logged
Message:
Thanks John thats what I thought, I just didnt know if I needed to run all four chanels into the amp to get the output for the subwoffer but i guess it splits off the lower hz from the 2 channels input. thanks again for the help drew
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
