| From | Message |
Brian Lowell
Dodge Dakota
JOIN HERE
9/04/2003
15:40:38
|
 Subject: hot do you
IP: Logged
Message:
How do you remove the stock speakers from the door if you can't get to them without removing the door pannel? its a 2002 dakota sport+ v6 4*2
patriot blue
|
02CC4.7
Dodge Dakota
JOIN HERE
9/04/2003
16:32:08
|  RE: hot do you
IP: Logged
Message:
Remove the door panels.....
|
CynicalA-Hole
Dodge Dakota
JOIN HERE
9/05/2003
13:13:40
| RE: hot do you
IP: Logged
Message:
Was that really a question worth asking??
|
Plasma-cutter
Dodge Dakota
JOIN HERE
9/05/2003
13:41:26
| RE: hot do you
IP: Logged
Message:
You could use a plasma-cutter, cut a hole in through from the outside of the door, then cut around the outside edge of the speakers, then the wire terminals just unplug from the speakers.
That would do it without affecting the door panels, except maby some melted plastic from the heat.
|
macgyver
Dodge Dakota
JOIN HERE
9/06/2003
19:37:00
| RE: hot do you
IP: Logged
Message:
these people don't know what they are talking about... don't use a plasma cutter, that will melt the plastic.. use a hack-saw and cut a hole on the oustide of the door, then kick it to make sure u got a good cut, reach around and yank on the wires till they come loose.. get a crowbar and pry the old speaker out and throw the new one in and hook up the wires. drop the speaker in the door and tape it up with Duct-tape, and 3 toothpicks to hold in place. now about that hole in the door... get some toothpaste, toiletpaper, 3 pokiemon stickers and some play-doh and cover up the hole.
|
JustSomeGuy
Dodge Dakota
JOIN HERE
9/08/2003
13:51:43
| RE: hot do you
IP: Logged
Message:
This really proves that stupid questions result in stupid answers! Speaking of which, how do you change your oil without removing the filler cap??
|
acme
Dodge Dakota
JOIN HERE
9/08/2003
15:57:35
| RE: hot do you
IP: Logged
Message:
thats easy, put a oil chang pan below the oil filter area, remove the oil filter, start the engine and let it idle till no more oil is dripping into the pan, install a new oil filter.
now remove the valve covers and slowly pour the oil in and around the rocker arms, checking the dipstick till its full
|
macgyver
Dodge Dakota
JOIN HERE
9/08/2003
19:49:10
| RE: hot do you
IP: Logged
Message:
i usually drill a 1\2 inch hole in the side of the engine block at a 45degree angel straight to the oil pan, then use a pump and suck out all the old oil and place it in a pancake syrup and save it for an April fools day gag. next pour ky-jelly down the hold to lube up the oil, take out the dipstick and use a french fry and some string to lower the french fry down the dip-stick tube and pull up to ck if the oil actually is in the pan. once finished use a piece of double-bubble gum and clog up the hole in the side of the engine block so the oil won't spill out. throw the dipstick away, i found out the french fry and string work better. have fun...
|
jeremy
Dodge Dakota
JOIN HERE
9/08/2003
21:24:08
| RE: hot do you
IP: Logged
Message:
you've all given good advice for the 4x4 v8 models, but he clearly states that it's a 4x2 v6. Wait, i just noticed that's it's also patriot blue.....sorry man, can't be done on the patriot blue ones.
|
macgyver
Dodge Dakota
JOIN HERE
9/09/2003
00:09:34
|  RE: hot do you
IP: Logged
Message:
they make a mod kit that transfers the screws from the 4X4 kit to the 4X2 in which brian owns. hummm about that color problem yes that's true. there is a shop in a town populated 2 people that have a method on transfering colors.... they use acid, and they pour it on the truck with the doors open and the windows down so all the color in the truck will dissapear and metal is shown. they use a tooshbrush (colgate works best) and apply guano over the truck, then you pick a color that will best suit your mod kit to you problem with the speaker set up..... er something the cost is 100,000 and will take a year to complete..
|
dug4.7
Dodge Dakota
JOIN HERE
9/12/2003
10:33:33
|  RE: hot do you
IP: Logged
Message:
You guys got it all wrong. The speakers have a magnet in them. All ya gotta do is find where the wires for the speakers come out of the door and hook them up to high voltage lines like the ones leading from a power plant. The resulting eletromagnetic pulse should pop the speakers right out. There might be a slight smell for a while, but just keep the windows down and it will go away. The voltage at your house ain't enough, ya gotta climb one of those towers and hook it directly.
|
postman
Dodge Dakota
JOIN HERE
9/12/2003
10:58:58
| RE: hot do you
IP: Logged
Message:
duh
|
mcgyver
Dodge Dakota
JOIN HERE
9/12/2003
15:25:46
| RE: hot do you
IP: Logged
Message:
that's the old way, but it works. Just make sure you are standing in water while it's raining with no shoes on so you can get it's awsome power at it's best.
|
trythis
Dodge Dakota
JOIN HERE
9/13/2003
16:04:56
| RE: hot do you
IP: Logged
Message:
set off a small thermo-nuclear device next to the Dak, garuntee it will work!
|
mcgyver
Dodge Dakota
JOIN HERE
9/13/2003
16:42:18
| RE: hot do you
IP: Logged
Message:
won't work with the paint job.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
