Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
03:30:35 - 12/24/2024

Custom Audio
FromMessage
wildcatz
Dodge Dakota
JOIN HERE


8/27/2003
01:52:33

Subject: Rigging a switch to turn amp on and off?
IP: Logged

Message:
Hey

I was wondering what would be required to hook up a switch on my dash to turn my amp/subs on or off. Reason is that other people in my family sometimes drive my car and dont like heavy bass with all songs. So what would i have to connect to the amp and run to the switch?



Hooedaddy
Dodge Dakota
JOIN HERE
 Email

8/27/2003
06:31:51

RE: Rigging a switch to turn amp on and off?
IP: Logged

Message:
That is easy!!!! Just get you a switch and hook it up to your remote wire and there you go. If your remote wire doesnt send juice to the amp then it will never come on. Hope that helps.



wildcatz
Dodge Dakota
JOIN HERE


8/27/2003
11:01:37

RE: Rigging a switch to turn amp on and off?
IP: Logged

Message:
but how does the wiring work?

right now i just have the remote wiring running from the cd player to the amp. what do i do in between?



JMII
Dodge Dakota
JOIN HERE
 Email

8/27/2003
11:14:21

RE: Rigging a switch to turn amp on and off?
IP: Logged

Message:
Go to the auto parts store and buy a switch, cut the remote wire, plug the radio end of the remote wire into one side of the switch and plug the amp end into the other side. Now the amp will only come on when the switch is "on" and the radio is on. Just get a simple, non-lighted toggle switch, it should have only two places to make connections.

- John

http://www.blueoceanpress.com/~storage/truck/index.html



WhatThe??
Dodge Dakota
JOIN HERE


8/28/2003
13:37:13

RE: Rigging a switch to turn amp on and off?
IP: Logged

Message:
Are you serious? You don't know how to wire a simple one way switch?? There's an input and an output, hell you can even wire it backwards and it will work.



J.D. Leddon
Dodge Dakota
JOIN HERE
 Email

8/30/2003
22:40:44

RE: Rigging a switch to turn amp on and off?
IP: Logged

Message:
Best thing to really do is spend the money & buy a equalizer with sub controls built into it that way you can just turn the subs off.



vik
Dodge Dakota
JOIN HERE
 Email

9/19/2003
13:09:29

RE: Rigging a switch to turn amp on and off?
IP: Logged

Message:
heyy iv just connected a rocker switch between the amp and the audio player. works very nicely.

like you no ur not supposed to listen to music with the sub connected whilst the car ignition is on, because it drains the battery.
I can listen to music for about 5mins, and then the battery finds it hard to start up.

with the switch connected, is it possible for me to listen to music while the ignition is on (and bass switched off) without causing the battery to get flat???

thanks

vik



BIGTYMER
Dodge Dakota
JOIN HERE


9/22/2003
09:52:48

RE: Rigging a switch to turn amp on and off?
IP: Logged

Message:
vik, yes the battery will last much longer without a sub amp being on. Your cd player while playing draws less than 20 amps where as an amp can be between 30-400 depending on the amp.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.