| From | Message |
Matt
Dodge Dakota
JOIN HERE
5/09/2003
19:18:14
|
 Subject: Sub Box Measurements for a Club Cab
IP: Logged
Message:
I was going to make a sub box for my 1999 Dakota R/T club cab. I would buy one off of Jason (makes boxes for club cabs), but i dont have enough money - sorry Jason.
I plan on putting 2 MTX 8000 12's in this box and a 600 watt amp in the center. I would like to move my hinges up so i can have more cu. space and get that deeper bass sound. I made a quick sketch below on Paint. If anyone knows the lengths of any of these measurements and would like to share them, I really appreciate it. i numbered the measurements to make it very easy to share what they are. (for example, length 1 = 48" ) If u share, i really appreciate it, thanks,
-Matt
|
KovzR6
Dodge Dakota
JOIN HERE
5/09/2003
19:42:00
|  RE: Sub Box Measurements for a Club Cab
IP: Logged
Message:
check out my box
http://www.sounddomain.com/id/kovzrt
you are going to have to do a fibre-glass bottom. if you dont and you use a solid wood bottom, you will lose about 3" of mounting depth
the subs are 12" rockford punch DVCs. they have a mounting depth of 6.5". and i have about 1" between the magnet and the bottom. EACH chamber has 1.25 ft^3
i toyed with moving the seats up too. and i gave up. you lose too much head room. so i just put a sold piece of 1/2" wood. covered it in gray vinyl and carpeted the bottom. and put it on cabinet hinges. if someone has to sit on it, too bad. i got my nice leather seat! lol
|
KovzR6
Dodge Dakota
JOIN HERE
5/09/2003
19:47:14
| RE: Sub Box Measurements for a Club Cab
IP: Logged
Message:
as for measurements, mine were
1=50"
2=15"
and for the "notch" in the floor. i took a piece of cardboard, cut it to fit around the notch, then traced it to the wood.
|
Matt
Dodge Dakota
JOIN HERE
5/09/2003
21:13:30
| RE: Sub Box Measurements for a Club Cab
IP: Logged
Message:
wow Kovsr6,
your box looks really nice! i cant build anything that nice! i dont even know how to make a fiberglass bottom. i'll just use wood. i'm not sure how i'm gonna do this either because the bottom isnt flat like a peice of wood. thanks for your advice,
-Matt
|
Jason
Dodge Dakota
JOIN HERE
5/10/2003
11:35:42
| RE: Sub Box Measurements for a Club Cab
IP: Logged
Message:
I like the diagram
|
tek
Dodge Dakota
JOIN HERE
5/12/2003
08:45:13
| RE: Sub Box Measurements for a Club Cab
IP: Logged
Message:
Here is another box with (4) 10", Kicker Comp Vr's..
BW's Dak, based on Anthony's design Check Anthons How for the dimensions.
Bw's is:
1=48"
2=16.5"
Glassed in bottom.
|
da show off
Dodge Dakota
JOIN HERE
7/16/2008
12:26:49
|  RE: Sub Box Measurements for a scoota
IP: Logged
Message:
howsit guys i need sum help
|
matt s
Dodge Dakota
JOIN HERE
11/09/2012
20:09:52
| RE: Sub Box Measurements for a Club Cab
IP: Logged
Message:
im tryin to put two 12" on the floor in the front between the front sets faceing out to each side but its hard to get it just right so i can still move both sets up and open my clovebox. any ideals?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
