| From | Message |
Skeletor86
Dodge Dakota
JOIN HERE
4/14/2003
15:03:55
|
 Subject: How to get the old one out
IP: Logged
Message:
I have a Kenwood KDC-X659 coming and know where to get the trim kit and the harness, but how do you get the old deck out?
2001 QC 4x4 with stock cassette 4 speaker system.
|
Andy L
Dodge Dakota
JOIN HERE
4/14/2003
21:35:01
| RE: How to get the old one out
IP: Logged
Message:
the trim around the radio should pull away but becareful as it's held in by clips and then there will be 4 screws than the radio should come out unplug the connectors on the back of the radio and than in stall the new one you can get kits and connectors at best buy or circut city but I reconmend buying the plug kit so all you have to do is wire the deck harness to the plugs and plug it in also if you have a factory amp hook up the remote turn on wire or else you can fry your deck
|
Skeletor86
Dodge Dakota
JOIN HERE
4/14/2003
22:02:27
| RE: How to get the old one out
IP: Logged
Message:
Thanks. This will be easy.
|
Skeletor86
Dodge Dakota
JOIN HERE
4/22/2003
07:24:17
| RE: How to get the old one out
IP: Logged
Message:
So I got this link from one of the other post.
http://www.carstereohelp.com/stereoremovalDodgeDakota.htm
I hope this helps anyone else.
Rich
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
