| From | Message |
Alan
Dodge Dakota
JOIN HERE
4/14/2003
03:11:45
|
 Subject: AMP CONFUSION???????
IP: Logged
Message:
I am running a almost complete pioneer system. The deck, 6inch fronts, 6 1/2 backs, and 2 12" subs (450w each) are all pioneer. Right now i can't afford the pioneer amps that i want. I shopped around and have to decide between a 600w Pyle amp, 800w Cyclone amp, or a 600w Pyrmid amp. Please help!!!!!!
|
lowdaksport
Dodge Dakota
JOIN HERE
4/14/2003
11:42:58
|  RE: AMP CONFUSION???????
IP: Logged
Message:
don't waste money on those. get a jbl at www.hypaudio.com they are cheap.
|
JMII
Dodge Dakota
JOIN HERE
4/17/2003
18:00:47
|  RE: AMP CONFUSION???????
IP: Logged
Message:
What ohms are the subs? How are you running them?
Save your money and get a real amp... there is a reason why the good ones costs so much.
I use (and recommend) HiFonics personally - excellent bang for the buck! Long standing competition respected and proven brand. See www.sounddomain.com for prices/models.
- John
http://home.mindspring.com/~jntmoore/truck/home.html
|
pelly3s
Dodge Dakota
JOIN HERE
4/17/2003
19:07:05
| RE: AMP CONFUSION???????
IP: Logged
Message:
lowdaksport i agree with you the JBL's put out more power than amps twice the cost. They also sound great
|
midnightdak
Dodge Dakota
JOIN HERE
4/18/2003
12:00:21
| RE: AMP CONFUSION???????
IP: Logged
Message:
Memphis,there good amps.
|
Snickersbps
Dodge Dakota
JOIN HERE
4/18/2003
12:27:49
| RE: AMP CONFUSION???????
IP: Logged
Message:
im gonna agree with the memphis audio. ive got a small two way(cant remember the wattage, but its one of the smaller ones) and it pushes my 12's in my camaro like whoa. my friend has a memphis set in his honda and it fills our warehouse with bass it hits so hard.
|
sean
Dodge Dakota
JOIN HERE
5/01/2003
15:31:11
| RE: AMP CONFUSION???????
IP: Logged
Message:
i was woundering if u have a 4 ohm setup on the subs and ur amp is 2 ohms and i know that it just cuts the power of the amp but i was woundering if it would hurt the amp itself doin that its a jbl 600 series...
|
JMII
Dodge Dakota
JOIN HERE
5/01/2003
16:11:10
|  RE: AMP CONFUSION???????
IP: Logged
Message:
The only thing that "hurts" and amp is running in too LOW of an ohm load. For example if you run a 2 ohm load on an amp that only handles 4 ohms you'll mess it up. It might just blow a fuse or toast itself into total meltdown.
But running a 2 ohm amp at only 4 ohms is perfectly fine... it will run cooler that way.
- John
|
sean
Dodge Dakota
JOIN HERE
5/01/2003
20:41:57
| RE: AMP CONFUSION???????
IP: Logged
Message:
Thanks
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
