Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
04:09:08 - 12/24/2024

Custom Audio
FromMessage
Jonathan King
Dodge Dakota
JOIN HERE
 Email

3/25/2003
20:13:22

Subject: Sub Box's for CC's
IP: Logged

Message:
If anyone lives in the Atlanta area, a stereo store named Sound Sensations can make a custom box for our Dakota's that sounds great. They can do it for 10's or 12's...both sound better than the MTX Thunderform. If anyone is interested they can look the store up on the internet or contact me for the number.



Jason
Dodge Dakota
JOIN HERE
 Email

3/25/2003
23:37:29

RE: Sub Box's for CC's
IP: Logged

Message:
How much? 10 and 12s



Jonathan King
Dodge Dakota
JOIN HERE
 Email

3/26/2003
07:16:16

RE: Sub Box's for CC's
IP: Logged

Message:
I am not sure of the amount...I want to say it is the same as the Thunderform(250) but I am not sure. If you call (770) 429-1600 they can help you. It is called a wave box and they make it for one 10 or 1 12, but it is louder than anything with 2, and they make it specific for each type of sub. They will make it to fit in the space under the seat like the Thunderform, but you have to tell them that. I was about to get one but I already had a Thunderform and don't have the funds to buy another box, but they are awsome. I just thought I would throw this out to everyone. Their webpage is www.sound-sensations.com and their email is carsound@bellsouth.net if you want to contact them. Ask for Mark Vickers. Hope I was of some help to someone.



Shanekeener
Dodge Dakota
JOIN HERE
 Email

3/26/2003
20:40:51

RE: Sub Box's for CC's
IP: Logged

Message:
I made one of those boxes by my self using 5/8" partical board it sounds real good its about the same deminsions as the thunderform



Jonathan King
Dodge Dakota
JOIN HERE
 Email

3/26/2003
21:09:20

RE: Sub Box's for CC's
IP: Logged

Message:
I can tell you that it definetly is not the same. The Wave Box is made using a specially designed program and procedures. Yes, it is possible to make your own box like a thunderform, but these are better sounding than any other box I have seen and you don't need a big amp to push it.



Jason
Dodge Dakota
JOIN HERE
 Email

3/26/2003
21:25:01

RE: Sub Box's for CC's
IP: Logged

Message:
Specially designed program? Does it cut the wood too? Are you talking about a speaker enclosure design software? Thats how I build mine. But the box is designed depending on the sub you put into it.



bakindak
Dodge Dakota
JOIN HERE
 Email

3/31/2003
06:57:40

RE: Sub Box's for CC's
IP: Logged

Message:
well if anyone knows where I can get this particular design program let me know cause I live in canada and cant find anyone to design me a box for my 91 CC and I cant afford to purchase a sub enclosure out of the states



Jay
Dodge Dakota
JOIN HERE
 Email

3/31/2003
08:25:39

RE: Sub Box's for CC's
IP: Logged

Message:
I build enclosures. If you can take pics and send me measurements I can build you one cheaper than any plastic one



bakindak
Dodge Dakota
JOIN HERE
 Email

3/31/2003
09:19:52

RE: Sub Box's for CC's
IP: Logged

Message:
where you at Jay cause I could send you pics and measurments if you are close enough to me



jason
Dodge Dakota
JOIN HERE
 Email

3/31/2003
11:15:51

RE: Sub Box's for CC's
IP: Logged

Message:
phoenix



KovzR6
Dodge Dakota
JOIN HERE
 Email

3/31/2003
11:36:57

RE: Sub Box's for CC's
IP: Logged

Message:
i just built a box for 2 12"s. i used 3/4" MDF and fiberglass for the bottom.

check out my post "MY (2) 12's PROGRESS" and you will find links to pics of my box.

i just picked up the wiring and carpet. just gotta drill a few holes, run some wires, then carpet it.



bakindak
Dodge Dakota
JOIN HERE
 Email

3/31/2003
13:22:05

RE: Sub Box's for CC's
IP: Logged

Message:
Its not that I dont want to build my own box KovzR6 its just that I dont have a whoel lot of time to do it, I just started a new job and I dont get enough time off on the weekend to do it and I cant find anyone in canada to do it for me, I'd send money to the states to have one done but the thing is it would cost me like twice what it is actually worth to get one made down there and then ship it here




   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.