| From | Message |
stumper
Dodge Dakota
JOIN HERE
1/29/2003
09:54:33
|
 Subject: Center console box.....
IP: Logged
Message:
I can make these center consoles for $45 plus shipping..... I'll do them bare MDF but for extra I could finish it out. Pictures here
http://www.sounddomain.com/member_pages/view_page.pl?page_id=293217
|
conig
Dodge Dakota
JOIN HERE
1/29/2003
12:43:39
| RE: Center console box.....
IP: Logged
Message:
do you have some more pics with different angles? also do you know will this console fit an xtant x series 10? also whats the airspace? does it have any compartments? cup holders?
|
stumper
Dodge Dakota
JOIN HERE
1/29/2003
14:24:02
| RE: Center console box.....
IP: Logged
Message:
Its roughtly 1 cubic foot(with speaker displacement),sealed. It should hold any 10. No cup holders in mine but it could be done very easily(shouldnt effect price). I didnt put a compartment in it because of airspace. BTW... I put an alumapro 10" in it and it sounds DAMN good.
Next week I'll make two of them up and then you can see it and see if ya want one.Im just wanting to see if people are interested in one so I dont make a couple and they sit around.
Eric
|
conig
Dodge Dakota
JOIN HERE
1/29/2003
14:55:36
| RE: Center console box.....
IP: Logged
Message:
the sub I want to put in there is 10.75 in diameter will it fit in this enclosure?
|
stumper
Dodge Dakota
JOIN HERE
1/29/2003
15:04:49
| RE: Center console box.....
IP: Logged
Message:
It will fit without a problem. Are you getting the x series?? The hexagon? I looked it up and the mounting dia. is 9.125. So your clear there. But Im not sure if the mounting side is a hex or not. I'll email them to ask. If it is I can make the cut out a Hex.
Eric
|
midnightdak
Dodge Dakota
JOIN HERE
1/29/2003
19:58:40
| RE: Center console box.....
IP: Logged
Message:
Where's the sub go at?and i would have to have cup holders,but i might be interested in one.It looks good :) oh yea one more thing...how does it mount?like does it bolt up in the same holes where the other one was at?I have a 2001 dakota cc should it fit?
|
conig
Dodge Dakota
JOIN HERE
1/30/2003
11:02:15
| RE: Center console box.....
IP: Logged
Message:
I got two x series 12's now but could always get another amp and add a 10. two bad a twelve wont fit under there.
|
midnightdak
Dodge Dakota
JOIN HERE
1/30/2003
18:53:27
| RE: Center console box.....
IP: Logged
Message:
Yea really but its still kewl cause theres a 10 to go there,but remember it will be kinda hard cause the 10's and 12's hit totally different frequencies,but it can be done.
|
stumper
Dodge Dakota
JOIN HERE
1/30/2003
20:20:40
| RE: Center console box.....
IP: Logged
Message:
The way I would do it is.... Have the 12's hitting 45hz and down and the 10 hitting 50-125hz.. Have the 10 for a midbass.
|
wtdakota01
Dodge Dakota
JOIN HERE
1/31/2003
00:14:22
| RE: Center console box.....
IP: Logged
Message:
i would like to have one with cup holders and it finished out e mail me @ jwc2323@hotmail.com
|
slanty shanty
Dodge Dakota
JOIN HERE
1/31/2003
10:49:23
|  RE: Center console box.....
IP: Logged
Message:
Is is not a little strange to have the bass coming from around your arm? A friend of mine wanted to take out that little change holder thing in the floor, and the whole middle seat, and make a long box that would go all the way from the dash to the rear seats. But I would think that would feel strange having all your bass right by your side. I know low freq's aren't directional, but I'm an ol' school like my bass behind me pointed into my back kind of guy...S~
|
iden_kros
Dodge Dakota
JOIN HERE
2/03/2004
11:59:52
|  RE: Center console box.....
IP: Logged
Message:
I have a 2000 dakota cc. I for sure want one finished if you can make it work for a 10 inch kicker solobaric L7.
Email me @ god(at)zapmy(dot)com and let me know if you can do it as well as the price finished. Cup holders would also be needed. I have an auto trans and my shifter is on the steering col. There is a tray on the floor in front of the current center console and the console itself has the cup holders that pull out. I would like to avoid removing the tray in front on the floor if we can.
|
Kevin
Dodge Dakota
JOIN HERE
2/03/2004
21:35:18
| RE: Center console box.....
IP: Logged
Message:
I would be interested. I would want cup holders too. Please email for more pics
NookieFiend003@aol.com
|
kixx
Dodge Dakota
JOIN HERE
2/04/2004
01:03:24
| RE: Center console box.....
IP: Logged
Message:
I am also interested email me at ktoy@neo.rr.com with details thanks
|
jcham
Dodge Dakota
JOIN HERE
2/04/2004
12:00:26
| RE: Center console box.....
IP: Logged
Message:
Stumper,
If you're still out there, I'd be very interested in a box. E-mail me if you're still making them.
j_chamness@hotmail.com
|
noshirtforyou
Dodge Dakota
JOIN HERE
2/05/2004
18:31:09
| RE: Center console box.....
IP: Logged
Message:
I'm interested as well, only problem is I have a bench seat..maybe if I can find bucket seats cheap, anyway my email is noshirtforyou@verizon.net
|
noshirtforyou
Dodge Dakota
JOIN HERE
2/08/2004
20:16:10
| RE: Center console box.....
IP: Logged
Message:
Hey Stumper could you make one for a dakota with a bench seat? I have pictures of one I could send yuo..please email me.
|
Martin
Dodge Dakota
JOIN HERE
2/09/2004
23:56:37
| RE: Center console box.....
IP: Logged
Message:
Heres mine guys.. I haven't posted in a while..
http://photos.yahoo.com/dbrain0
Martin
|
Kevin
Dodge Dakota
JOIN HERE
2/10/2004
18:16:18
| RE: Center console box.....
IP: Logged
Message:
anybody know stumper's email?
|
Woody
Dodge Dakota
JOIN HERE
2/14/2004
23:48:31
| RE: Center console box.....
IP: Logged
Message:
I need a 10" box for my 88 Reg Cab with a bench seat......can you make me one?????
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
