Forums
Forum Tools
|
 |
00:51:39 - 12/20/2024
Custom Audio
| From | Message |
Phil Hart
Dodge Dakota
JOIN HERE
12/11/2002
11:42:32
|
 Subject: Dash Problems
IP: Logged
Message:
I just got done installing my new HU in my
2001 dakota reg cab. Almost. Everything is
working, right side of the dash looks great,
however, the left side of the dash does not
seem to want to fit back in. I looked into this
problem for over and hour now and can't
seem to find out what the problem is. So has
anyone else had this problem with a 2001 + ?
The right side is flush and looks great but the
left just wont go in.
Any help would be great..... Another day or
two and the dash might be broke.
Phil Hart
01 Dak Sport
|
Todd
Dodge Dakota
JOIN HERE
12/11/2002
12:55:42
| RE: Dash Problems
IP: Logged
Message:
I have a 99,check to make sure the bottom of the dash you put back in,just above the steering wheel,is all the way in,mine has a rubber flap,the flap may not be in all the way,or folded over,keeping the dash from flushing up correctly.If not,make sure the connectors are not bent,on the back of the dash piece you pulled out.good luck,Todd
|
Clevite 77
GenIII
12/11/2002
15:21:25
| RE: Dash Problems
IP: Logged
Message:
I have a 2002, and was going to say the same thing. Take it back off, and start over, this time start on the driver side and work your way to the right. Also make sure your snaps are lining up in the holes. Also make sure you don't have anything in the way
Line-X over the rail
Grille-Tech Grill Insert
Clear Corners
Krypton 4300K Lights
H - Brew Intake
Dual Exhaust
Autolite Plugs
TPS Mod
180 R-Shaw T-stat
Removed Rubber Flap
Mobil - 1
JVC KD-SX980 MP3 Player
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
