| From | Message |
heres another
Dodge Dakota
JOIN HERE
11/18/2002
12:46:07
|
 Subject: quad cab sub suggestion
IP: Logged
Message:
Digital Audio DATW10E 10" Sealed 5/8" MDF Truck Box (pair) - 0.517cf each
and fill 'em with:
CDT MS-100 10" Subwoofer w/ 4ohm voice coil - 150 watts RMS 10": .45-.90 cu.ft.
the zeb has them on sale for $79 a piece
I have the boxes already and they fit behind the rear seats with little mods (have to move the jack, and it would be even easier if you could move the air vents)
I might have to get me some of those CDT's and try it out...
www.thezeb.com
|
02dakqc
Dodge Dakota
JOIN HERE
11/19/2002
08:24:02
|  RE: quad cab sub suggestion
IP: Logged
Message:
from the dimensions i have it doesnt fit between the plastic moldings and the vents, do you have pics?, not that im doubting you i just dont wanna get it all ripped apart to find it wont fit, for all i know my measuring skills could be crap
thanks
|
heres another
Dodge Dakota
JOIN HERE
11/19/2002
10:27:35
|  RE: quad cab sub suggestion
IP: Logged
Message:
Plastic moldings? I'm not real sure what your talking about, but I have taken my seats out and can fit both boxes behind the seats. There is JUST barely enough room behind the smaller seat, and the larger seat s no problem. But if you could find a way to remove those plastic air vents, you would have no problem at all. Also, if you wanted to, take the material off of the back of the seats, and remove the smaller metal bars from the back of the seats.(In between the yello filling and the material) I took mine out just in case, and it didn't change the feel of the seat when remounted at all. But you don't need to. OH, and to make even more room, take that thick wall of whatever that stuff is? material off of the back wall, and cut it where the back wall bends away from where the seats are. You will need to put the top piece back on because you can see it when the seats are replaced. And of course, you won't be able to fold the seats up after you get it all in, :(
|
02DAKQC
Dodge Dakota
JOIN HERE
11/19/2002
11:26:48
| RE: quad cab sub suggestion
IP: Logged
Message:
sweet, the moulding i was refering to was on the outter edges on either side of the seats, covering the pillars, i think, covering something anyways. But im glad they fit anyways, i was planning on removing that material off the wall too. Where you putting your amp?, did you have any room between the vents?, are you gonna run amps for the door speakers?
|
heres another
Dodge Dakota
JOIN HERE
11/19/2002
12:36:41
| RE: quad cab sub suggestion
IP: Logged
Message:
well the amps are another story. I have seen someone mount them to the back wall, but with the speaker boxes there, I don't think they will fit... so I guess either under the front seats or something??? I ain't got that far yet :)
|
mrp
Dodge Dakota
JOIN HERE
11/19/2002
22:21:56
| RE: quad cab sub suggestion
IP: Logged
Message:
The JL audio 8wo truck boxes fit tightly behind the rear seats also.
|
BlackDak20
Dodge Dakota
JOIN HERE
12/03/2002
01:14:42
| RE: quad cab sub suggestion
IP: Logged
Message:
Does anyone know if i would be able to fit jl audio 10w3v2's in that digital audio box?, thanx guys.
|
02dakqc
Dodge Dakota
JOIN HERE
12/03/2002
11:12:04
| RE: quad cab sub suggestion
IP: Logged
Message:
whats the depth of the sub?, and what volume does it require, cause its kinda small box for a 10", and if you put two, amp location is kinda difficult becuase under the seats is kinda small and akward for any decent size amps, ill be making a fiberglass enclosure over the christmas break to replace the center console and still look stock,then i can mount the amps behind the seat like TonyC has. if i ever get the money to buy the stuff ill post pics
|
JC
Dodge Dakota
JOIN HERE
12/03/2002
14:25:49
|  RE: quad cab sub suggestion
IP: Logged
Message:
Hey Guys,
Look into a custom audio shop and have them reenforce your back doors and remold the door panels. Then they can mount a couple of nice subs in the doors. They will stick out a couple of inches but it works nice and looks stock. Has to be a good shop though. If not it will look cheesy nad sound bad.
|
BlackDak20
Dodge Dakota
JOIN HERE
12/03/2002
15:42:49
| RE: quad cab sub suggestion
IP: Logged
Message:
The jl subs have a 5.75inch mounting depth. Do you know if these subs will fit? thanx guys
|
TonyC
Dodge Dakota
JOIN HERE
12/03/2002
19:35:50
| RE: quad cab sub suggestion
IP: Logged
Message:
http://www.geocities.com/tony_cricco/techie.html
|
JC
Dodge Dakota
JOIN HERE
12/03/2002
20:28:55
| RE: quad cab sub suggestion
IP: Logged
Message:
The adio guys will be building out hte new panels to fit the speakers. Try a speaker company called Focal. A french company. Very high quality, kevlar cones. Tre' Sheik.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
