| From | Message |
Wadak
Dodge Dakota
JOIN HERE
3/01/2004
11:31:11
|
 Subject: Extended Group Buy
IP: Logged
Message:
I spoke with John Mercedes today at southeastrt.com about the Harland Sharp Roller Rockers. We spoke at length abouth these Roller Rockers and the way they mount, they do not require the use of guideplates or do not require extra maintenance once installed. They require hardened pushrods if you exceed 5500 rpm, in racing for example. Due to overwhelming response, the February group buy has been extended on these sets. Check out this post in the Performance forum for more information:
https://www.dodgedakota.net/boards/per/9852.html
Special Price Offer:
Harland-Sharp Roller Rockers
1.6r Non-Adjustable for 5.2L/5.9L V8
1.7r Non-Adjustable for 5.2L/5.9L V8
Add ~10rwhp with 1.6 ratio or 15+ rwhp and 20+ tq. with a set of 1.7 ratio Harland Sharp Roller Rockers. Save time and money over other aftermarket roller rockers because these do not require aftermarket valve covers, guideplates, etc. (the use of hardened pushrods is recommended for 5500rpm+ situations). Designed by the manufacturer to be installed easily, they do not require valve lash adjustment or extra maintenance once installed. This brand of rockers have been in use in Magnum motors for nearly five years without any problems.
Price Offered:
$262 for one set of Roller Rockers (1.6 or 1.7)
Add $10 for shipping to the U.S.
Add $20 for shipping to Canada
Add $30 for shipping to Hawaii (2-Day Air)
Add $7.61 if Paying via PayPal
(best value if paying via check or money order)
Special pricing running through 2/17/04, but may be extended depending upon demand.
Contact John Mercedes at john@southeastrt.com or 813-503-8069 or 813-886-6166 for further details.
http://www.dakota-durango.com/cgi-bin/ads.pl?page=01
|
tazzy
GenIII
3/01/2004
11:48:10
| RE: Extended Group Buy
IP: Logged
Message:
Oh sure..I get my rockers..and now all the group buys start..LOL
|
Wadak
Dodge Dakota
JOIN HERE
3/01/2004
12:24:05
| RE: Extended Group Buy
IP: Logged
Message:
Apparently this group buy was started at beginning of February but it was not posted on to the V6 board. I happen to come across it the other day. I have had something like this happen to me many times, I go to buy something, then find it on sale later on. Hey, I appreciate you putting up your post. I think you have inspired a few people.
|
J and J Auto
GenII
3/01/2004
14:46:15
| RE: Extended Group Buy
IP: Logged
Message:
Ya is'nt that the way it goes
tazzy I am going to test a set myself, I really
like the alinement system over the crower valve
stem alingnment system and the ease of instalation
requireing no adjustment
For the novice backyard mechanic its an excellent
way to go just bolt them in
And shop time on an install 1 hour over 2 to 3
on the crowers
I have seen the crowers go over 100,000 miles and
have there rev kit in my stroker but for a stock
motor I think they are great.
Nice squre rigid design and made from some tuff
Alm
I would still recomed the crowers stainless steel
if you plan on reving 5500 to 6000 rpm but a stock
motor would never rev that high.
Larry
J&J Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
