| From | Message |
miami
Dodge Dakota
JOIN HERE
2/25/2004
20:43:30
|
 Subject: CHECK THIS OUT!!!
IP: Logged
Message:
Think this will work? I have headers, exhaust, msd igniton, 180 thermostat, and soon to be relocated ati sensor..not like those make a difference. Will my stick internals be able to handle it you think? please let me know. any1 tried it? p.s i would need a dakota alternatr pulley right?
(3) If you're really wanting a lot of boost, grab a spare alternator pulley, cut a keyway groove on the inner hole (to match the grove depth on the Powerdyne Pulley), and install it. The factory Alternator pulley makes 13# boost!! WARNING - USE AT YOUR OWN RISK...You WILL void the warranty on the Supercharger and risk damaging your engine unless it's built for this type of boost level (Pistons, Crank, Rods, O-Rings Head/Block Surface).
Top
|
miami
Dodge Dakota
JOIN HERE
2/25/2004
20:45:16
| RE: CHECK THIS OUT!!!
IP: Logged
Message:
this was one speadtweaks.com
|
miami
Dodge Dakota
JOIN HERE
2/25/2004
20:46:47
| RE: CHECK THIS OUT!!!
IP: Logged
Message:
one last thought...i have the r/t
|
doubt it.
Dodge Dakota
JOIN HERE
2/26/2004
17:43:44
| RE: CHECK THIS OUT!!!
IP: Logged
Message:
(Pistons, Crank, Rods, O-Rings Head/Block Surface).
You have none of the above re-worked. You'd screw up, but if you got the money it'd be fun to see. :)
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
