| From | Message |
Steve calabro
Dodge Dakota
JOIN HERE
2/12/2004
08:40:00
|
 Subject: lookin for a 2bbl intake for a 318
IP: Logged
Message:
do any of you guys know where i can find a 2 barrel intake manifold for a 73-75 or any other carb 318? i have a number-SP2P-2V-318 thats an edelbrock manifold, but i cant find it. i want to put this in my truck because i found stuff on allpar that says yo ucan get about 25mpg out of this, so if you can help out, please do. thanks, Steve
|
99dakota
Dodge Dakota
JOIN HERE
2/25/2004
09:23:38
|  RE: lookin for a 2bbl intake for a 318
IP: Logged
Message:
I have one off a 78 360 I also have the carb I changed to a 4bbl I thought the carb was junk but it was realy the motor. It should work on a pre magnum 318. I don't know if the carb is any good but its a pretty big 2 bbl. my uncle also has a 67 318 w/ a 2bbl I don't know if he is going to reuse when he builds it for another car.
My email is fasttruck1@hotmail.com if your interested. I may be able to clean it and sandblast it also
|
Timberwolf
GenIII
2/25/2004
09:29:38
| RE: lookin for a 2bbl intake for a 318
IP: Logged
Message:
Mopar makes an M1 that will work. You can find them in all the mail order catalogs. Jeggs, Summitt, etc.
|
gen1dak
Dodge Dakota
JOIN HERE
2/25/2004
18:27:06
| RE: lookin for a 2bbl intake for a 318
IP: Logged
Message:
The single and dual plane M1's for LA engines are big-port intakes to fit 360-size head ports. They are 4v intakes, so an adapter would be needed. If you are dead-set on the sp2p-2v, you're gonna have to be patient and scan eBay, etc. One will pop up eventually. You'd come out great with a 500-600cfm 4v carb and a Performer Intake. It has 318-sized ports. At worst, use a 2v adapter with the 2v carb on the Performer.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
