| From | Message |
zoner
Dodge Dakota
6/07/2001
08:27:24
|
 Subject: Intake
IP: Logged
Message:
Well I have decided to go with the Flowaster exhaust. Series 50 single in dual out with 3" chrome tips out the rear. Also plannin to take the old filter box out and add a 3" piece of exhaust tubing and a new K&N filter. Also heard the I need to take the rubber flap out near radiator. Heard alot of guys talk of using PVC. Isn't it a lil to hot undeer there for PVC, am I doing the right thing using stainless exhaust tubing??? Was planning on leaving the stock hose there and just adding the exhaust piece as a joint between the filter and the hose. Any Tips or suggestions would be appreciated......
Zoner
99 SLT 3.9 V6
Mods
Alpine Sound
Kenwood 12" Sub
Stainless Nerf Bars
New Brake and Gas pedals
Backdraft Spoiler by Lund
Bug Shield
Vent Visors
Flowmaster (Next Week)
K&N Filter (This Weekend)
|
Bernd
Gen III
 
6/07/2001
08:50:02
|  RE: Intake
IP: Logged
Message:
Optimal tubing would be aliminum...but the 3" steel or PVC work just fine under the hood. (It's not that hot.)
1997 Dodge Dakota SLT - V6
Supercharged @ 10#
|
JohnE
Dodge Dakota
6/07/2001
12:15:03
| RE: Intake
IP: Logged
Message:
One thing to keep in mind is how well the material you use conducts heat.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
