| From | Message |
Wavemogul
Dodge Dakota
JOIN HERE
1/28/2004
11:59:34
|
 Subject: 2000 4.7 T-body, cams & intake
IP: Logged
Message:
So I'm ready for the mods. Throttle Body, HO Cams and HO intake. Before I drop the $, anyone have any last words of wisdom? tricks? Install tips? I understand I just order the cams and intake for the same year Grand Cherokee 4.7...anyone have part numbers? The T-bodys in consideration are the Fastman and F&B....Any opinion on which is better for these mods? I intend to flash the PCM once this ituff is done..Thanks.
|
Paul
Dodge Dakota
JOIN HERE
1/28/2004
15:53:07
| RE: 2000 4.7 T-body, cams & intake
IP: Logged
Message:
Check out my post in the General section under Fastman TBs. Dan Arcand said he would give us a great price on TBs.
|
b1llyw
GenII
1/28/2004
16:31:09
| RE: 2000 4.7 T-body, cams & intake
IP: Logged
Message:
Fastman vs. F&B is like the Lite beer commercials, "tastes great vs less filling". Dan's stuff is good. In my opinion F&B is better. I've been saying the since long before I was an F&B dealer. Those mods are going to increase your top end power potential, particularly the manifold. The F&B will benefit you in that combo.
Bill White - KRC Performance
'95 CC 4x2, SLT - 408 is done, truck isn't
'03 Ram 1500 QC 4x4 Hemi Off-Road
|
R/TBlues
Dodge Dakota
JOIN HERE
1/28/2004
21:20:39
| RE: 2000 4.7 T-body, cams & intake
IP: Logged
Message:
Less Filling!....Taste Great.....
That's the 4.7L.
Now here comes the KING of BEERS...the R/T...
Thank you very much, thank you, thank you....
Elvis has left the building..
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
