| From | Message |
Austin
Dodge Dakota
JOIN HERE
1/24/2004
01:25:30
|
 Subject: Kenne Bell for Sale, 5.9 or 5.2
IP: Logged
Message:
I have a non polished Kenne Bell SC with 6 PSI pully and 90% complete kit, I took it off a 2000 Dakota QC that had about 30k on it. The SC has even less miles on it. Email me for more info as I'm not a member here. Any takers at 2500$?
Austin
AIM: Rantipole1
Rantipole1@hotmail.com
|
JayDak99
GenI
1/24/2004
18:55:24
|  RE: Kenne Bell for Sale, 5.9 or 5.2
IP: Logged
Message:
what engine was it on? One would think RT 360 since there wasn't 5.2 offered in 2000
|
BrianY 02 R/T
Dodge Dakota
JOIN HERE
1/24/2004
19:00:36
|  RE: Kenne Bell for Sale, 5.9 or 5.2
IP: Logged
Message:
90 % conplete kit? Wich 10 % is it missing?
|
R/TBlues
Dodge Dakota
JOIN HERE
1/24/2004
23:53:13
| RE: Kenne Bell for Sale, 5.9 or 5.2
IP: Logged
Message:
The Quad Cabs could be purchased with the non-R/T 360 motor. I thought they were only available in 4x4 QC's. I may be wrong. I know for a fact the 4x4QC Dak came with a 360 as an option. It should bolt right up to an R/T.
|
no
Dodge Dakota
JOIN HERE
1/25/2004
00:34:33
| RE: Kenne Bell for Sale, 5.9 or 5.2
IP: Logged
Message:
you can get a qc 2wd w/ 360, but there is no difference between r/t motor, and any other 360, the 3 inch exhaust gives it 5 more horse than a non-r/t with 2.5.
|
Austin
Dodge Dakota
JOIN HERE
1/25/2004
13:59:54
| RE: Kenne Bell for Sale, 5.9 or 5.2
IP: Logged
Message:
It was off a 4x4 2000 QC Dakota 5.9.
But the SC fits a 5.9 or a 5.2.
There is a crack in the cap that sits over the throttle body, a few vacuum lines missing, a few hoses, and a fuel line, nothing is missing that you shouldn't be able to get at any auto parts store, and no pulley change tool.
|
Austin
Dodge Dakota
JOIN HERE
1/27/2004
23:30:39
| RE: Kenne Bell for Sale, 5.9 or 5.2
IP: Logged
Message:
Bump for interest.....
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
