| From | Message |
VetteGC
Dodge Dakota
JOIN HERE
1/20/2004
19:14:44
|
 Subject: KRC vs HO Cams
IP: Logged
Message:
Are the KRC cams better? Are hey the same?
|
jaggy
GenIII
1/21/2004
12:55:17
| RE: KRC vs HO Cams
IP: Logged
Message:
I asked the same questions before I did the HO cams in mine... I have heard that the KRC cams are good but not testimonials.
If you look on there site they compare them directly to the HO cam and say that they are quite a bit better.
I was able to get the HO's for $120 for the pair.
It was a no brainer.
I am happy that I did the job and if you plan to yourself there are great instructions available.
just take your time and start with a cold engine block.
|
Curtis
Dodge Dakota
JOIN HERE
1/21/2004
17:10:09
| RE: KRC vs HO Cams
IP: Logged
Message:
Ive been to KRC's shop..... he does not grind cams ...... he sells other peoples cams and calls them his .......
|
Tom J.
Dodge Dakota
JOIN HERE
1/21/2004
17:56:26
| RE: KRC vs HO Cams
IP: Logged
Message:
KRC uses a computer program to design different cam profiles. The KRC206 which I have is a HO cam that is shipped to Crane cams and reground to KRC's specifications. It has to be a HO to start with because the duration on a stock one is not close enough to be reground. Because the regrind is going to be smaller than the original cam lobs lash caps are used so the lift is more than the stock HO cam. There is no comparison between the HO and KRC206.
|
b1llyw
GenII
1/21/2004
19:56:55
| RE: KRC vs HO Cams
IP: Logged
Message:
Curtis, you're right in that we don't physically grind the cams in our shop. The vast majority of engine builders don't. We have Comp Cams and Crane do the actual process. However, our cam grinds are our own designs. The HO cams are a nice upgrade. The 206 cams, etc. are more of the same.
Bill White - KRC Performance
'95 CC 4x2, SLT - 408 is done, truck isn't
'03 Ram 1500 QC 4x4 Hemi Off-Road
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
