| From | Message |
blackrtaz
Dodge Dakota
JOIN HERE
1/09/2004
13:29:51
|
 Subject: stock eternals
IP: Logged
Message:
ok so I have a 99 rt cc just a few boltons, looking to sell my classic car and possibly purchase a supercharger for the 360...how well does the stock eternals hold up and to what PSI...? if I did Scharge, I wouldnt be running that high of a boost, cause it is daily drivin...thanks in advance...
|
blackrtaz
Dodge Dakota
JOIN HERE
1/09/2004
13:31:33
| RE: stock eternals
IP: Logged
Message:
I hope to hear from Bad360RT on this issue...
|
eternals
Dodge Dakota
JOIN HERE
1/09/2004
19:45:26
| RE: stock eternals
IP: Logged
Message:
Do you mean like, forever ?
|
gen1dak
Dodge Dakota
JOIN HERE
1/09/2004
20:37:13
| RE: stock eternals
IP: Logged
Message:
7psi works well with stock internals.
|
oh my
Dodge Dakota
JOIN HERE
1/10/2004
17:35:37
| RE: stock eternals
IP: Logged
Message:
he wants to run stock eternals, forever!
|
sharp
Dodge Dakota
JOIN HERE
1/12/2004
00:24:07
|  RE: stock eternals
IP: Logged
Message:
Ive got a kenne bell on mine and they tell me you can run the 7psi pulley on 93oct. and the 10psi pulley with 100+oct. and keep everything stock. Ive tried the 10 psi pulley on the street and found the 7 psi pulley works much better for daily driving in my opinion.
|
blackrtaz
Dodge Dakota
JOIN HERE
1/12/2004
14:09:10
| RE: stock eternals
IP: Logged
Message:
"yeah man like forever" FkNstupid! lol...
thanks sharp for the valid response, how much power did you gain with just the Scharger? and how many miles have you had the SC on for?
|
FkNstupid
Dodge Dakota
JOIN HERE
1/12/2004
17:59:13
| RE: stock eternals
IP: Logged
Message:
Your the cluck that cannot spell! LOL
|
blackrtaz
Dodge Dakota
JOIN HERE
1/12/2004
18:34:25
| RE: stock internals
IP: Logged
Message:
yeah fukers! sorry bout the spelling, but I didnt ask if you could grade my grammer...
|
holla
Dodge Dakota
JOIN HERE
1/12/2004
19:12:33
| RE: stock eternals
IP: Logged
Message:
im running 6lbs of boost on mine. I was wonderin the same question about how much i could run with my stock internals. i run a 13.4 1/4 with exhaust, msd ignition, powerdyne supercharger, and headers.
|
afi360
R/T
1/12/2004
21:35:48
|  RE: stock eternals
IP: Logged
Message:
been awhile since ive posted....great to see the trolls are still multiplying!
anywayyy, considering im on my 2nd 360 block in a 60,000 mile truck, i'd say you have to take damn good care of it to last with a s/c. my first motor died due to oil starvation, but anyway, with a cast bottom end, if you run more than 11 psi every day, youre begging for trouble. 6-8 on good gas, youre ok. 9-11 with alky injection and great gas, you should be ok. 12+ bye bye pistons!
hope it helps.
|
sharp
Dodge Dakota
JOIN HERE
1/13/2004
00:03:18
| RE: stock eternals
IP: Logged
Message:
Sorry but I was looking at so many 4.7L stuff I didnt notice you were talking about the 360. But in case you cared this may or may not help. Otherwise go by afi360s advice, hes got it right. On my 4.7L I am told with my mods of free flow exaust and intake kit that comes with the blower and computer upgrades I have, that it should be about 130hp+ extra. Probably around 100hp with just the blower kit. Maybe a little more. I plan on installing the H.O. cams, headers (maybe) and the 100 shot nitros. This I will definantly have to run good gas and only 7psi., tops, or like afi360 says the pistons will go bye bye.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
