Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
02:48:34 - 12/29/2024

Dakota Performance
FromMessage
massivdak
Dodge Dakota
JOIN HERE


11/01/2003
13:01:18

Subject: 4.10 gears
IP: Logged

Message:
a few questions about 4.10 gears

1. effect on traction
2. cost of install
3.1/4 mile time
4. effect on warranty


3.9 rc 5spd
k&n intake,msd igniton,brass cap and rotor,flowmaster exhaust,lakewood traction bars

goal is a 15.7 1/4 mile



black2003
Dodge Dakota
JOIN HERE


11/01/2003
14:57:40

RE: 4.10 gears
IP: Logged

Message:
I have a 4.7 auto 4x4 standard cab. I just switched from a 3.55 to a 4.10. So far i love them and would do it again. It cost me 1650 to do the front and rear plus an auburn limited slip. I have the 31" tires. It feels like my truck is always in the power band. Acceleration has greatly improved. For a 5 speed the 4.10 might be a little high for a daily driver. I cruise at 2100 rpms at 70 because the auto has such a low overdrive. You may be close to 2500 at 70. I only lost about .5 MPG. Your warrenty shouldn't be affect as long as the garage does a good job. If something happens in the drivetrain and if the new gears are the cause then your warrenty is gone. If you have any expert do the swap you should be A Ok. I'm not sure how it will effect your traction because i have the auto. I can slam on the pedal on dry pavement and only spin them a little. I do have good tires though. Hope this helps a little.



massivdak
Dodge Dakota
JOIN HERE


11/02/2003
10:28:33

RE: 4.10 gears
IP: Logged

Message:
thanks

i just heard that there is a towing package or something along those lines for the daks with 3.9 gears and a limited slip my source was shake at best though



Matt
Dodge Dakota
JOIN HERE
 Email

11/02/2003
12:42:28

RE: 4.10 gears
IP: Logged

Message:
5-speed Dakotas have a nearly useless first gear with 3.92's, much less 4.10's. The first gear in the NV3500 is 4.02. My experience is that first gear is good for about 15 feet with 3.92's. I start out in 2nd in the 5-speeds I have driven. Dodge really should use a tranny with closer gear ratios. A 3.0 first gear would be more practical. But that's just me...



xplikt
GenIII
 User Profile


11/03/2003
11:36:52

RE: 4.10 gears
IP: Logged

Message:
<== 4.56s + 5pd

It really isn't as bad as everyone makes it out to be. I use my first gear all the time..

-Mike
http://www.dodgetruckworld.com/xplikt/
2002 2WD RC SLT 4.7L 5spd 3.92 LSD
MBRP Single in/out | straight piped 3rd cat | turndown tip
Full Hotchkis and RAS
Shaved emblems and antennae
150BM fan | removed clutch | HD Radiator
R/T wheels on 275/40/17 Dunlop 9000s

   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.