| From | Message |
grumpy
Dodge Dakota
JOIN HERE
9/03/2003
20:27:47
|
 Subject: cam,lifters,dbl rlr chain?
IP: Logged
Message:
Ive got a bad lifter, while im in there im going to change out the cam and chain, does anyone know what cam i could use thats a little hotter and wont mess with the computer.# and where to get it. I think they make a cam and lifter kit but dont know what to get.also a # for a double roller chain set.any help would be appreciated.93 3.9 v6 magnum. thanks
|
b1llyw
GenII
 
9/03/2003
21:10:38
| RE: cam,lifters,dbl rlr chain?
IP: Logged
Message:
Check out KRC Performance. http://www.krcperformance.com
The 200 cam would work well for your setup.
Bill White
'95 CC 4x2, SLT - under construction
'03 Ram 1500 QC 4x4 Hemi Off-Road
|
rtdkota
R/T
9/03/2003
21:36:58
| RE: cam,lifters,dbl rlr chain?
IP: Logged
Message:
Do you have roller rockers, or stock rockers?
I have a nice grind that I have done for a few people that run 1.7 roller rockers. 3.9 Cam, in the .500 lift range, 208/210 duration.
Sam
www.socaldakota.com
|
grumpy
Dodge Dakota
JOIN HERE
9/03/2003
22:19:01
| RE: cam,lifters,dbl rlr chain?
IP: Logged
Message:
you know thats a damn good guestion did 93 3.9 have roller rockers? this motor has never had anything done to it.Ive never had the covers off to know.is that the only way to find out whether it does or not?
|
rtdkota
R/T
9/04/2003
03:12:40
| RE: cam,lifters,dbl rlr chain?
IP: Logged
Message:
If it's a stock motor-- it won't have them. Figured you would have gone that route already. If you don't want the hassle of swapping cams, Crower 1.7s are a good and easy install.
Sam
www.socaldakota.com
|
TimG
Dodge Dakota
JOIN HERE
9/04/2003
12:09:15
| RE: cam,lifters,dbl rlr chain?
IP: Logged
Message:
Do you have cams Sam ?? I have the 1.6 mopar roller lifters (not installed yet) and want to put a cam in it. KRC has a cam but $349.00 is a lot to spend on a v6 cam.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
