| From | Message |
james kimball
Dodge Dakota
JOIN HERE
8/08/2003
16:34:57
|
 Subject: polish tb with spiral groves
IP: Logged
Message:
Alright all you performance guru's
has anyone after opening up the TB cut spiral groves into the frontal area to simulate turbulance for airflow kinda like that insert that goes in the airtube to spin the air comming in.
i know some TB spacers have these grooves cut in to them.
would this help to give better mixing of fuel?
any thoughts?
later jimbo
|
dumbazz
Dodge Dakota
JOIN HERE
8/08/2003
17:43:42
|  RE: polish tb with spiral groves
IP: Logged
Message:
y do u think we say tb spacers are junk, do u think the air is going to be spining when it gets through 18" of intake runners......NOT !!!
|
Demon Dakota
DakotaEnthusiast
8/08/2003
17:49:06
| RE: polish tb with spiral groves
IP: Logged
Message:
Anything put in front of the runners won't do jack squat...it doesn't take a damn genious to figure that out.
K&N Drop in AF (CAI during summer months)
True Dual exhaust and removed third cat
HO Cams & HO Intake
FASTMAN 70mm TB
Autolite 3923 Plugs
TPS @ .76 VDC
IAT Adjuster Mod
14.52@94.2 MPH at Silver Dollar Raceway
|
smarterthenu
Dodge Dakota
JOIN HERE
8/09/2003
08:48:21
| RE: polish tb with spiral groves
IP: Logged
Message:
lesseee...... you want to ALMOST induce turbulance not 1 not 2 not 3 but 4 changes of direction before the fuel is mixed with said air and then wonder if it will change anything, not to mention that the air will "sit" in a plenum after number 1 change and before number 2 and thus at least for a moment in time, stop all movement.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
