| From | Message |
Chris2B
Dodge Dakota
JOIN HERE
8/02/2003
15:01:33
|
 Subject: 3.55's to 3.92's
IP: Logged
Message:
I recently went from 29 to 32 inch tires. I want to upgrade from 3.55 to 3.92 gear ratio to give me back some of the power I lost. Does anyone know if dealers do this or how much it might cost?
|
jaggy
GenIII
8/04/2003
11:57:13
| RE: 3.55's to 3.92's
IP: Logged
Message:
the dealer will charge about $1200 per axle.
A good driveline shop will do the front and rear for about $800 before parts.
gears are about $500.
I just put 4.10's on my 4.7 and love them.
I am also running 32 inch tires.
All the gears are the same price so get the ones you really want.
My thought was for that much money I would rather have one step lower than the factory provides.
My milage actually improved city and highway.
good luck.
|
Osyrus
Dodge Dakota
JOIN HERE
8/04/2003
21:36:03
| RE: 3.55's to 3.92's
IP: Logged
Message:
Hey Chris2b,
Did you have to do a lift or anything in order to fit those 32's on.
What truck you driving and how wide are your tires. Really curious because Im ready to put some 32's on but not really wanting to do the body lift!
|
Mark
Forum Moderator
8/04/2003
23:12:35
| RE: 3.55's to 3.92's
IP: Logged
Message:
I got my open 3.50 converted to a LSD 3.92 for a total of $900 with parts. New limited slip carrier, bearings, ring gear, pinion gear, and royal purple synthetic oil... and labor included.
-Mark Hryckiewicz
1993 Sport RC SB 5.2L Auto
DodgeDakotas.com
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
