| From | Message |
Jim
Dodge Dakota
JOIN HERE
7/25/2003
11:58:37
|
 Subject: F&B 52mm TB For Sale:
IP: Logged
Message:
Brand new F&B 52mm TB only on for a week or so. $295.00 plus shipping takes it. Retails for over $500.00 plus shipping. It comes with all the hardware to install. It is just sitting in my room and I want to get rid of it. Email me at f98sentra@aol.com
|
Hammers
Dodge Dakota
JOIN HERE
7/25/2003
12:24:20
|  RE: F&B 52mm TB For Sale:
IP: Logged
Message:
Why for you get rid of it? Didn't like it?
|
Jim
Dodge Dakota
JOIN HERE
7/25/2003
17:56:07
|  RE: F&B 52mm TB For Sale:
IP: Logged
Message:
My friend gave me his so now I have two a used one and a new one.
|
Jay
Dodge Dakota
JOIN HERE
7/28/2003
17:37:51
| RE: F&B 52mm TB For Sale:
IP: Logged
Message:
Nice Friend..
|
dakotard11
Dodge Dakota
JOIN HERE
7/29/2003
22:11:55
|  RE: F&B 52mm TB For Sale:
IP: Logged
Message:
will the 52mm bolt on to my 2000 dakota 3.9
|
rtdkota
R/T
7/30/2003
09:17:48
| RE: F&B 52mm TB For Sale:
IP: Logged
Message:
52mm is way too big for your 3.9L... Even a 50mm F&B is too big for the 3.9L guys.
I sell the 48mm F&B-- has correct linkage, etc.
Sam
www.socaldakota.com
|
Hmm
Dodge Dakota
JOIN HERE
7/30/2003
19:16:20
| RE: F&B 52mm TB For Sale:
IP: Logged
Message:
Hey, why is it too big? I know with a carb you cant overdo it or you lose power. Throttle bodies don't work the same way though. The air is metered in afterwards. If the ports are too big wouldn't it be just like having a lead foot?
|
rtdkota
R/T
7/30/2003
19:38:32
| RE: F&B 52mm TB For Sale:
IP: Logged
Message:
Couple things-- balanced intake-- too big on a speed density-- vacuum is affected, does weird things--
Throw a 850 cfm carb on a small block 318-- and you'll experience similar things-- bogggg.
Sam
www.socaldakota.com
|
Hmm
Dodge Dakota
JOIN HERE
7/30/2003
19:56:43
| RE: F&B 52mm TB For Sale:
IP: Logged
Message:
How about a 52mm on an otherwise stock 318?
|
rtdkota
R/T
7/30/2003
20:51:11
| RE: F&B 52mm TB For Sale:
IP: Logged
Message:
It will run, but it's too big as well-- A 50mm works best on a 318, even up to a mildly modded or stroked motor-- depends on heads, cam, mods, etc.
Sam
www.socaldakota.com
|
pete
Dodge Dakota
JOIN HERE
7/30/2003
22:45:59
| RE: F&B 52mm TB For Sale:
IP: Logged
Message:
hey sam, how about a 52 on a r/t with intake/exhaust/ignition/converter.. planning on an m1, but not till later..
|
Hammers
Dodge Dakota
JOIN HERE
7/30/2003
23:53:27
| RE: F&B 52mm TB For Sale:
IP: Logged
Message:
I thought the 52mm was the thing with a 5.2 could be wrong, someone out there correct me please?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
