| From | Message |
matt
Dodge Dakota
JOIN HERE
7/12/2003
00:17:22
|
 Subject: 4.7 I need more PWR
IP: Logged
Message:
What is the best performance gain for 4.7 Dak that wont clean out my pocket. 00 Dak Qc 4.7 cat back flowmaster exhaust, air intake, New spark plugs gapped .045
|
Dak Man
Dodge Dakota
JOIN HERE
7/12/2003
00:35:00
| RE: 4.7 I need more PWR
IP: Logged
Message:
go for some Bosch Platinum +4 they give u 4 times the ignition and put in a performance chip. should raise hp some. if you really wanted to splurge id say its time for the SUPERCHARGER kit. but u dont want yur pockets empty. drop me a line if nemore ?'s
darkcarnival_17@hotmail.com
|
notchlx
Dodge Dakota
JOIN HERE
7/12/2003
00:35:44
| RE: 4.7 I need more PWR
IP: Logged
Message:
Apply for one of those plastic cards, and get yourself a Paxton. hehehe
Best gain under $3500 would prolly be the cams, then there's the 70MM TB, Kenne Bell Optimizer..
|
gsmarquis
Dodge Dakota
JOIN HERE
7/12/2003
12:39:37
| RE: 4.7 I need more PWR
IP: Logged
Message:
I was told not to use plat spark plugs with the 4.7......i think
it was because they freez in the head and are really hard to
get out.
|
Rob454
Dodge Dakota
JOIN HERE
7/12/2003
13:44:41
| RE: 4.7 I need more PWR
IP: Logged
Message:
Dak Man
How do you get 4 times the ignition on a bosch plug? the spark is only going to go to one electrode at a time
Rob
|
Tony Montana
Dodge Dakota
JOIN HERE
7/12/2003
13:50:13
| RE: 4.7 I need more PWR
IP: Logged
Message:
First you get the money, then you get the power, then you get the woman.
|
Seriously
Dodge Dakota
JOIN HERE
7/13/2003
12:01:52
| RE: 4.7 I need more PWR
IP: Logged
Message:
Get the Kenne Bell Optimizer chip.
|
j
GenIII
7/13/2003
17:07:26
| RE: 4.7 I need more PWR
IP: Logged
Message:
It's not a chip, it's a flash. Get a 70mm tb and a true cold air intake to go with your catback. Get the H.O. cams, then get the flash. I think you would want to get the flash last so you can tell them what mods you have and they can match the flash to your mods. You can remove your clutch fan for free. I've heard good things about relocating the IAT sensor (very cheap). Why are you gapping your plugs at .045"?
2000 4.7 CC auto, clear corners, Magnaflow catback, Kenne Bell s/c, Aquamist water injection.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
