| From | Message |
88 SC DAK
Dodge Dakota
JOIN HERE
7/04/2003
13:05:49
|
 Subject: magnum timing cover
IP: Logged
Message:
Hello all. Does anyone know if a timing cover from a pre magnum engine will work on a magnum engine? I just need to know if it will bolt on and work. Are the cranks the same? Will the magnum cam fit under the cover? Thanks for any help.
|
FazDak
GenII
7/04/2003
15:27:26
| RE: magnum timing cover
IP: Logged
Message:
I have been told but not seen for myself that the mag cover is more shallow than the LA cover. The LA cover had to clear a fuel pump eccentric so thats probably the reasoning there.
I think the cranks are the same but not positive on that one.
"Will the magnum cam fit under the cover" not exactly sure what your asking there.....under what cover, the timing cover? In short....Mag cams wont work in LA's at all, their roller and most LA's are hyd.
|
88 SC DAK
Dodge Dakota
JOIN HERE
7/04/2003
18:56:28
| RE: magnum timing cover
IP: Logged
Message:
Thanks Faz. Thats just the info I was looking for. I also just found out the timing chains are the same.
|
b1llyw
DakotaEnthusiast
7/04/2003
22:35:46
| RE: magnum timing cover
IP: Logged
Message:
You should be able to swap timing covers between Magnum and pre-Magnum motors.
Bill White
2002 QC 4x4, SLT , 4.7, 5 spd, 3.92 LSD
1995 CC 4x2, SLT, 318, 5 spd, 3.55 LSD
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
