| From | Message |
j.j.
Dodge Dakota
JOIN HERE
7/01/2003
20:08:41
|
 Subject: help on k&n part no.
IP: Logged
Message:
im looking to make my own air intake tube but dont know what the part# is to fit over the end of a 3" PVC pipe. Also where do you get robert shaw 180 degree thermostat. Any help would be appreciated.
|
gotanRT
Dodge Dakota
JOIN HERE
7/02/2003
00:34:38
| RE: help on k&n part no.
IP: Logged
Message:
https://www.dodgedakota.net/boards/gen/5120.html
also you might want to try the ABS plastic tubes instead of PVC...they have less chance of catching fire and poisoning your lungs...
|
dkr8611
Dodge Dakota
JOIN HERE
7/02/2003
12:06:24
| RE: help on k&n part no.
IP: Logged
Message:
Autozone for the T-stat.
|
Scott
Dodge Dakota
JOIN HERE
7/02/2003
12:53:26
|  RE: help on k&n part no.
IP: Logged
Message:
Check out K&N's website. They list all sorts of fileter and sizes. http://www.knfilters.com/universal/univrndtap.htm
As for your intake, PVC will not support a flame on it's own and will self-estinguish. If it does burn with the rest of your truck however you will have more to worry about than PVC fumes. Ever see a car burn? THICK black smoke. Not a pretty site. I would stay away from ABS personally as it is brittle. It is basically styrene (ya know, the clear disposable plastic cups your would squeeze and they would crack top to bottom) with a modifier in it.
Scott
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
