| From | Message |
Ste Vz RT
Dodge Dakota
JOIN HERE
6/21/2003
16:18:33
|
 Subject: What should I buy?
IP: Logged
Message:
Hi, I have a 99 cc R/T (K&N FIPK and cat back Flowmaster) and for graduation i have recieved about $1500. What should i buy next to get me the most bang for the buck, anyone think i can hit mid 14's with this money? It's in mid 15's right now probably so i got some work ahead. Thanx for any input in advance.
|
moparjoe20
Dodge Dakota
JOIN HERE
6/21/2003
16:33:37
|  RE: What should I buy?
IP: Logged
Message:
A set of Mopar Performance or GS motorsports headers , open the exhaust up to 3" , ditch the cat if no inspection in your area , an M1 2 barrel intake and a Mopar PCM.
Thats all I have on mine and am running 14.90's w/2.20 60's.
BTW - I have a 318 CC w/3.55's so 14's should be no problem for you.
|
Jim
Dodge Dakota
JOIN HERE
6/21/2003
17:13:40
|  RE: What should I buy?
IP: Logged
Message:
I have a M1 2bbl Manifold that I will sell has about 800 miles on it sell it for $325.00 shipped and I also have a F&B 52mm TB that is brand new only on for a couple of days paid $535.00 shipped will sell for $435.00 shipped. If you want them both I will sell for $700.00 shipped.
|
pete
Dodge Dakota
JOIN HERE
6/21/2003
17:16:45
| RE: What should I buy?
IP: Logged
Message:
i dont know why youre hitting mid 15's ... what altitude are you at? i have a 99 and did 14.7 with only cutouts and a pcm. everything else stock, intake, tires etc...
pete
|
Ste Vz Rt
Dodge Dakota
JOIN HERE
6/22/2003
10:47:00
|  RE: What should I buy?
IP: Logged
Message:
Thanks for the input guys. I've heard a lot of good things about the M1 but i heard it really kills your low end power and i sometimes pull 2 jet ski's on a trailer, 2000#'s tops, would that turn my truck into a dog? Cause right now i can barely feel them behind me. Thank you for the offer Jim I will consider it. BTW does that include that instalation kit you need?Thanks Again
|
Jim
Dodge Dakota
JOIN HERE
6/22/2003
11:26:58
|  RE: What should I buy?
IP: Logged
Message:
I have everything you need all the bolts and spacers the only thing you will have to get are new gaskets, but seeing howI only have very few miles on it my gaskets may still be ok to use, I will send you them and you can decide if you want to reuse them or not. Other than that I have everyting you need for the install.
|
Buddy
Dodge Dakota
JOIN HERE
6/22/2003
15:59:42
| RE: What should I buy?
IP: Logged
Message:
Get a 50mm throttle body, M1, Mopar PCM, and a set of PPH/Mopar header. You should be in the low 14s.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
