Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
02:31:23 - 12/29/2024

Dakota Performance
FromMessage
4.7 CH4 Ngv
Dodge Dakota
JOIN HERE
 Email

6/08/2003
23:17:59
 Subject: 4.7 Sport Sway Bar
IP: Logged

Message:
I have a 2000 4.7 5 spd Sport Quad Cab. It has sway bars front and rear. The front is 34mm and the rear is 9/16". I know Energy Suspension makes polyurethane bushings for 28 and 30 mm fronts and 9/16 rears. Does anyone on this forum know where I can get 34mm greaseable bushings for the front? Has anyone taken the 33mm ES bushes and opened them up?

Thanks



4.7 CH4 Ngv
Dodge Dakota
JOIN HERE
 Email

6/10/2003
09:53:42
 RE: 4.7 Sport Sway Bar
IP: Logged

Message:
Has no one with a Sport come across this before?



NJQCDak
GenIII
 User Profile


6/10/2003
10:37:04
 RE: 4.7 Sport Sway Bar
IP: Logged

Message:
Sorry. I haven't had experience with polyurethane bushings. I did install an R/T front bar and a Quickor rear bar(I think they both came with polyurethane bushings for the mounting bracket but not the end links). It's a lot flatter ride than stock front and rear. I would try searching the web for polyurethane bushings. I thought I came across a manufacturer in NJ. Good luck.

'01 QC Sport, 3.9L V6, 5spd, 2wd, Volant Intake,
SS Gibson exhaust, MSD Wires, Accel Super Coil, NAPA Cap, Flometrics Billet 48mm TB , JBA Silver Ceramic Headers, Autolites 3923s, R/T front swaybar & Quickor rear swaybar, KYB Monomax shocks

   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages

Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.