| From | Message |
inix
Dodge Dakota
JOIN HERE
6/02/2003
15:13:56
|
 Subject: cam timing advance
IP: Logged
Message:
Hi, im going to be puting in a new timing chain (pro gear 3000 from huges) and was wondering if it would be a good idea to put in 4 degrees of advance? would i need a degree wheel?
Using this for instructions http://www.pavementsucks.com/tech/timingchain.php?p=1
Plus haynes/chiltons
Thanks
|
inix
Dodge Dakota
JOIN HERE
6/02/2003
15:14:31
| RE: cam timing advance
IP: Logged
Message:
5.2 btw
|
Anthony G
Dodge Dakota
JOIN HERE
6/02/2003
16:28:10
| RE: cam timing advance
IP: Logged
Message:
I wouldn't mess with it, I've tried advancing my timing with my KRC206 and JP timing chain, I lost top end by advancing and if I tried to retard it any more it wouldn't crank over. So unless you are willing to crack the it open more than once, I wouldn't bother with it. Either change your cam, get a PCM to advance your timing. Stick with the factory alignment is your best bet.
|
inix
Dodge Dakota
JOIN HERE
6/03/2003
12:06:24
| RE: cam timing advance
IP: Logged
Message:
dont the krc cams already have some advance built into them? Ya i wouldnt mind tearing back into it if something wassnt right
|
Anthony G
Dodge Dakota
JOIN HERE
6/03/2003
12:25:09
| RE: cam timing advance
IP: Logged
Message:
My JP has notches that shows what degree it can be set at. If you align it right then move it to the degree you wanted then it should be ok. But a degree wheel would be your best bet on doing it once with full potential.
|
jaydak
Dodge Dakota
JOIN HERE
6/03/2003
13:48:57
| RE: cam timing advance
IP: Logged
Message:
anthony g did the 206 make a big dif?
|
Anthony G
Dodge Dakota
JOIN HERE
6/03/2003
14:17:52
| RE: cam timing advance
IP: Logged
Message:
It's twice the gain of what 1.7 RR gave me.
Right now I'm running the stockers, I sold my MP 1.7 and might get some 1.7 from SouthWest R/T that are non-adjustable.
I'm waiting for oil pump & a Hypertech programer, I should be getting them any day now. I'll see if it will help my low end, right now it has good power from idle to 3000rpm then the power comes on like a Turbo surge right up to redline.
If my torque comes back with the Hypertech, I might get rid of my modded kegger and go back with my M1 2bbl agian.
|
inix
Dodge Dakota
JOIN HERE
6/04/2003
23:27:16
| RE: cam timing advance
IP: Logged
Message:
bump
|
inix
Dodge Dakota
JOIN HERE
6/05/2003
13:52:35
| RE: cam timing advance
IP: Logged
Message:
up
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
