| From | Message |
DrewzR/T
Dodge Dakota
JOIN HERE
5/31/2003
21:08:56
|
 Subject: Installed 52mm TB!!! Idle Problem Now!!!
IP: Logged
Message:
Alright once again I need someones help! I installed my 52mm f&B today which took about an hour to do!
Now that its on it idles really high and seems to want to stay there! I cleaned the IAC with carb cleaner and was really careful not to move it! The plunger was sticking out when I took it out of the stocker and thats how I left it when I put it back in!
One thing I did notice is that when the truck isnt running the pedal feels normal and then when I start it the pedal gets really stiff!
Im sure everything is back the way it is supposed to be! I also reset the cpu twice! Tomorrow the M1 goes on and would like to know what the problem is! I did the throttle body today to save time tomorrow with the M1 install!
Can anyone help with this matter??? Archives didnt give any answers! Sorry for the long post!
New IAC solenoid maybe???
Drew
|
Troy
Dodge Dakota
JOIN HERE
5/31/2003
21:43:27
|  RE: Installed 52mm TB!!! Idle Problem Now!!!
IP: Logged
Message:
I would check the linkages and cables again. It sounds like that may be your problem, since you said it stiffens up as you push the gas. Sounds like something is in a bind. Hope that helps.
P.S. I put a 50mm on mine and the idle moved up noticeable as well. Put the stock tb back on and it went away. May just be due to more airflow. Don't know for sure, but it is annoying.
|
hahaha
Dodge Dakota
JOIN HERE
5/31/2003
21:49:44
| RE: Installed 52mm TB!!! Idle Problem Now!!!
IP: Logged
Message:
how is putting the tb on 2day going 2 help with installing the m1 2morrow you will have 2 take it back off 2 put the m1 on
|
DrewzR/T
Dodge Dakota
JOIN HERE
5/31/2003
22:17:46
| RE: Installed 52mm TB!!! Idle Problem Now!!!
IP: Logged
Message:
No No No I said it is normal when the truck isnt running but when I start it the pedal gets really stiff! I don't think its the cables but it could be!
Um...hahaha if you havent realized the throttle body has solenoids on it that has to be switched over to the new one! now all I have to do it take it off and put it on the M1 and I save time switching things over tomorrow! Now all I have to do is plop it on the M1! Is that better for you!! Or do you need pictures!
|
islanderpc
Dodge Dakota
JOIN HERE
5/31/2003
22:22:06
| RE: Installed 52mm TB!!! Idle Problem Now!!!
IP: Logged
Message:
map sensor hose loose?
how bout the throttle cable got it routed properly thru the guide?
you should ask your questions to whom you bought it from(FB).
|
DrewzR/T
Dodge Dakota
JOIN HERE
5/31/2003
22:25:28
| RE: Installed 52mm TB!!! Idle Problem Now!!!
IP: Logged
Message:
Yeah i was gonna but i just did it tonight and they arent open so i have to wait till monday! It is drivable so it really isnt a hurry to fix it just wanted some opinions!I'll have to check it all out again in the morning ! Thanks
|
hahaha
Dodge Dakota
JOIN HERE
5/31/2003
23:00:42
| RE: Installed 52mm TB!!! Idle Problem Now!!!
IP: Logged
Message:
i'm from missouri
|
DrewzR/T
Dodge Dakota
JOIN HERE
5/31/2003
23:43:05
| RE: Installed 52mm TB!!! Idle Problem Now!!!
IP: Logged
Message:
That explains everything!!!
You mean Misery!!
|
rtdkota
R/T
6/01/2003
00:11:53
| RE: Installed 52mm TB!!! Idle Problem Now!!!
IP: Logged
Message:
Yo Drew--- call me
619-274-1292
Let me see what we can figure out.
Sam
www.socaldakota.com
|
DrewzR/T
Dodge Dakota
JOIN HERE
6/01/2003
02:57:35
| RE: Installed 52mm TB!!! Idle Problem Now!!!
IP: Logged
Message:
Sam when is good! Doin the M1 tomorrow but could call if your not busy!
|
crapshoveler
Dodge Dakota
JOIN HERE
6/01/2003
08:21:24
|  RE: Installed 52mm TB!!! Idle Problem Now!!!
IP: Logged
Message:
It could be a vacuum leak. That's what happened to me when I installed mine.
|
DrewzR/T
Dodge Dakota
JOIN HERE
6/01/2003
10:18:53
| RE: Installed 52mm TB!!! Idle Problem Now!!!
IP: Logged
Message:
Well I got up this morning and double checked everything once again! I started it up and drove it around the block and the idle has seems to have gotten alot better! Took it up to 4 grand in first and it went right back down as the truck slowed down!
Maybe it was the linkage spring being to stiff???? Or the computer learning the mod??
There is a definite gain but feels like I lost some torque but thats cool because I'm building up to the blower so I dont mind it for now!
Time to go do the M1!
Thanks guys
|
troy
Dodge Dakota
JOIN HERE
6/01/2003
11:43:07
| RE: Installed 52mm TB!!! Idle Problem Now!!!
IP: Logged
Message:
u aint doing shiit drew.
|
DrewzR/T
Dodge Dakota
JOIN HERE
6/01/2003
18:31:59
| RE: Installed 52mm TB!!! Idle Problem Now!!!
IP: Logged
Message:
LOL Um Alright dude! The M1 is on thank you very much! Very impressed too! Will have pics for ya troy to prove it as soon as I get them developed!
|
Josh
Dodge Dakota
JOIN HERE
6/01/2003
20:33:32
| RE: Installed 52mm TB!!! Idle Problem Now!!!
IP: Logged
Message:
sounds like ur tps...?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
