| From | Message |
jaynay13
Unregistered
JOIN HERE
5/20/2001
14:03:19
|
 Subject: 32x11.50
IP: Logged
Message:
will 32x11.50s fit on stock 99 slt4x4 without any rubbing ? will be using the stock 15x7 rims thanks
|
Hawkeye
Dakota Enthusiast
5/20/2001
15:36:27
|  RE: 32x11.50
IP: Logged
Message:
I am running 32x11.50 BFG AT's on the stock 15x7 rims on mine. No rubbing anywhere. Friend of mine also has 32x11.50's on his truck, same as mine, no problem. Click on my profile for a picture. Cant see them too good but they are there.
'00 QC 4x4
4.7 3.55 LSD
|
Blckdak
Unregistered
JOIN HERE
5/20/2001
18:58:47
|  RE: 32x11.50
IP: Logged
Message:
Can you turn your wheels all the way to either side without rubbing the tires against the frame or the fender pieces. If so thats great news for me!
|
Hawkeye
Dakota Enthusiast
5/20/2001
19:26:50
| RE: 32x11.50
IP: Logged
Message:
Yes I can turn mine to lock in both directions, no rubbing, my buddys truck is the same. Also have maxed out the suspension, And at full flex and full turn still no rubbing. Its close, about 1/2 or so clearance at its closest point but it doesnt rub. I just raised my front torsion bars about a 1/2 in too so now there is about 3/4 of and inch or so room. Only reason I cranked my bars is that they were not set right from the factory. One side was a half in lower than the other and the high side was about a half in lower than every other 2000 and 2001 4x4 Dak that I checked, including my friends.
'00 QC 4x4
4.7 3.55 LSD
|
notto
Dodge Dakota
5/24/2001
17:09:29
| RE: 32x11.50
IP: Logged
Message:
I have a 2000 rc 4x4 with 33x12.50s on it.All i did was crank the torsion bars up and trimed a little bit off the bumper cover.Then I took it in to get the allignment done. It made it ride little rougher than stock but it looks great.And there's no rubbing at all.
'00 RC 4x4 4.7
5spd 3.55 LSD
|
Blckdak
Dodge Dakota
5/24/2001
18:08:12
| RE: 32x11.50
IP: Logged
Message:
I heard that crankin on the torsion bars to much puts alot of stress on them and if you were to hit a good bump that they may snap. Dont know if its true, i cranked on mine once cause the front end looked alittle low but it pretty much settled back to the way it was (not as bad). I would like to fit atleast 32's on there though.
2000 CC 4x4 4.7L
|
Hawkeye
Dakota Enthusiast
5/24/2001
19:24:34
| RE: 32x11.50
IP: Logged
Message:
You should be able to fit 32's without much trouble. Just stay with the 7 inch wide rims. 8inch ones will probably rub slightly. Yes you are right about the torsion bars. Cranking them all the way does put a lot of stress on them and increases the chance of something breaking. Not saying it will, you just really increase your chances.
'00 QC 4x4
4.7 3.55 LSD
|
albert
Dodge Dakota
5/25/2001
02:33:18
| RE: 32x11.50
IP: Logged
Message:
Hey notto, got any pics of your truck with the 33's?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
