| From | Message |
Can, Adam
Dodge Dakota
JOIN HERE
5/16/2003
22:05:12
|
 Subject: pcm
IP: Logged
Message:
i just got a pcm from my buddys truck cuz he traded it on a new r/t. my question is can i just hook it up to my truck and it'll be okay or do i need to get it flashed. it came out of a 00 r/t and mines a 99 r/t
|
Lew360
Dodge Dakota
JOIN HERE
5/16/2003
23:32:57
| RE: pcm
IP: Logged
Message:
It won't work at all. The '00 has different pin in and out as well as different O2 senors and other sundry items. The part numbers are different as well. Sorry.
'99 DA RC R/T, Gibson Headers and Cat-back, MSD 6a, BTM, IAT adjuster, Powerdyne Supercharger, M-1 4/2, Mopar PCM
|
can,Adam
Dodge Dakota
JOIN HERE
5/16/2003
23:58:37
| RE: pcm
IP: Logged
Message:
there the same number and we hook it up i tried it and it just wount turn over. it started and then died it seems like its just not getting anygas.it just keeps turning over but wount kick in.please help
|
stevo
Dodge Dakota
JOIN HERE
5/17/2003
00:18:21
| RE: pcm
IP: Logged
Message:
i looked at the web site and the pcm is good for 5.9 from 1998 - 2000 so it should work
|
Lew360
Dodge Dakota
JOIN HERE
5/17/2003
00:52:17
|  RE: pcm
IP: Logged
Message:
From http://store.yahoo.com/chucker54/noname6.html
or www.manciniracing.com
1999 - 5.9L 4 x 2, federal, Automatic
MOPP5007107
2000 - 5.9L 4 x 2, federal, Automatic
MOPP5007205
From http://www.mopartsracing.com/parts/ram.html
DAKOTA 5.9L 4X2 FEDERAL (AUTO)
4876896 1998
5007107 1999
5007205 2000
Hope that helps. The Numbers above are for the Mopar performance PCM. There were a lot of changes in the PCM between those years.
'99 DA RC R/T, Gibson Headers and Cat-back, MSD 6a, BTM, IAT adjuster, Powerdyne Supercharger, M-1 4/2, Mopar PCM
|
4x4dak
Dodge Dakota
JOIN HERE
5/17/2003
09:01:38
| RE: pcm
IP: Logged
Message:
Once the PCM has been flashed with a VIN number it can't be used in another dakota. When started the PCM asks the body controller module (BCM) for it's VIN. If the two VIN numbers (BCM and PCM) don't compare the PCM cuts fuel. As far as I know there is no way to re-flash the PCM with another VIN.
|
98Durango360
Dodge Dakota
JOIN HERE
5/18/2003
14:03:40
| RE: pcm
IP: Logged
Message:
I believe the dealer can flash new VINs. When you buy a MP PCM you have to get your mileage and VIN flashed to use it, so somebody must be able to do it.
|
4x4dak
Dodge Dakota
JOIN HERE
5/18/2003
19:43:32
| RE: pcm
IP: Logged
Message:
They can be flashed when they are new but once flashed they can not be reflashed.
|
adam
Dodge Dakota
JOIN HERE
5/18/2003
20:53:00
| RE: pcm
IP: Logged
Message:
they can be re-flashed i got mine done. you just got to have your vin and miles put on.
|
Daniel D
Dodge Dakota
JOIN HERE
5/19/2003
00:46:48
| RE: pcm
IP: Logged
Message:
if you know what your doing yes you can reflash the vin, i work at the dealership and we've done it. most of the time it will still run with another vin but just might throw a code.
Daniel D
http://www.domesticdisturbancela.com/daniel.html
|
Adam
Dodge Dakota
JOIN HERE
5/19/2003
22:13:09
| RE: pcm
IP: Logged
Message:
so it will still work if you take a 00 pcm and put it in the 99. al you have to do is reflash the pcm.
|
Frank
Dodge Dakota
JOIN HERE
5/20/2003
12:50:49
| RE: pcm
IP: Logged
Message:
Is this mopar pcm similar to the Jet stage 2, if so which is better?
|
stveo
Dodge Dakota
JOIN HERE
5/20/2003
16:29:07
| RE: pcm
IP: Logged
Message:
the mopar is way better most people here will agree jet stage sucks
|
Frank
Dodge Dakota
JOIN HERE
5/20/2003
22:29:02
| RE: pcm
IP: Logged
Message:
what exactly does thid mopar chip do, and how much $$$$?
|
Neil
Dodge Dakota
JOIN HERE
5/23/2003
06:28:49
| RE: pcm
IP: Logged
Message:
1. The MOPAR PCM is not a chip. It is a replacement computer.
2. The VIN in the PCM will not keep it from working in another vehicle. The security system may. If the original owner has a factory security system, the PCM will work work in a truck that does not have the security system. If the buyer has the security system the PCM will work. I've have a used VIN flashed pcm that works in my 99 Durango. Both of us had the sercurity system. I've tried my stock PCM in a non security system equiped vehicle, and it does not work. I've also tried a non security equiped PCM in my truck. (Dan Arcand aka Fastman) Thank goodness I did not activate the alarm The security system is not in the PCM (the same part number works for both) but something gets set in the PCM when it is activated. This has gone around and around. I read from others on Dodge forums who have come to the same conclusion that it is the alarm feature
3. The mileage is not stored in the PCM. It is in the CAB.
|
can,Adam
Dodge Dakota
JOIN HERE
5/23/2003
18:13:34
| RE: pcm
IP: Logged
Message:
Okay the truck that i took the pcm out of was a 00 r/t and it had the factory security system mines a 99 r/t and it has a factory security system so should it work or not. the guy a the dealer said it had to be flashed with your vin because it thinks its stolen. The truck turns over but just not getting and gas which makes sence.cuz thats what the factory systems do when u push the button on your truck. please help
|
4x4dak
Dodge Dakota
JOIN HERE
5/23/2003
21:01:25
| RE: pcm
IP: Logged
Message:
It cuts off fuel because the vin numbers do not match (PCM and BCM). Daniel D. says the vin can be reflashed once flashed but I did not have any luck on my 98. On a new PCM the dealer is prompted to input the vin and mileagebut once prompted (using the scan tool) they are not prompted again.
|
can,Adam
Dodge Dakota
JOIN HERE
5/23/2003
22:36:48
| RE: pcm
IP: Logged
Message:
thanks for the help i talk to a mopar guy at the dealer and he said they can be reflashed. the 98 and 99 cant though. but they can reflash the new ones.
|
Neil
Dodge Dakota
JOIN HERE
5/27/2003
12:21:44
| RE: pcm
IP: Logged
Message:
VINs don't have to match. I have a used PCM with with the previous owners VIN in it. No problems and as I said above I also had Fastman's PCM in my Durango. My stock PCM would only crank his. The only difference between our trucks is his does not have the alarm.
|
Kevin
Dodge Dakota
JOIN HERE
7/09/2012
20:41:13
| RE: pcm
IP: Logged
Message:
how do i find out if my pcm is a federal or CA. emisions ??
|
good fella
Dodge Dakota
JOIN HERE
2/07/2015
06:40:08
| RE: pcm
IP: Logged
Message:
hello, 2000 dakota replaced the pcm with my
grandpa's same year truck/model his made 11th
month and mine made 2nd month of 2000. (different
part number on the pcm's. with his installed in my
truck all gages would not work but rough idle and
dying went away soon as i fired my truck up
dealer's cant give me a list of pcm part numbers
for that year and how many different ones i may
have to choose from to get the right one.. rough
idle with my pcm before changing and after
switching back to mine),my grandpa let me use his
after i fixed my no spark issue to find i would
finally have to purchase a pcm or distributor.
anyone have a list of pcm part numbers for 6
cylinder 3.9 2000 dakota list avaible?
|
| | P 1 Next Page>> |
