| From | Message |
gps_jetskier
Dodge Dakota
JOIN HERE
5/16/2003
13:04:30
|
 Subject: KRC HO Cams
IP: Logged
Message:
I was looking at these cams rather then the Mopar cams. Any opinions?
Which of the Cams compare to the Mopar cams? The 200, or 206?
|
Ryan
Dodge Dakota
JOIN HERE
5/16/2003
13:34:57
|  RE: KRC HO Cams
IP: Logged
Message:
I can get you a custom cam for your application. Check my website out it has all of the details.
v8Performance.com - Dodge Performance Products
|
gps_jetskier
Dodge Dakota
JOIN HERE
5/16/2003
14:02:25
| RE: KRC HO Cams
IP: Logged
Message:
Thanks,
John @ McKinney Dodge Parts is willing to sell me the Mopar HO cams for $108.00 each and the HO intake cost is $148.00. I'm not sure about the intake yet though. I do alot of pulling and have 33" on it. Might do better with just the cams I think.
I got the powerslots and pads by the way. Just have to find time to install them.
Thanks anyway.
Dean
|
Andrew
Dodge Dakota
JOIN HERE
5/18/2003
04:40:28
|  RE: KRC HO Cams
IP: Logged
Message:
I would tell John about the group buy that we had here and ask if he will match that price, I bought the cams for $58 a piece and the intake for like $126 or something close to that. The only reason the price has went up is because all of us Dakota guys are buying up the stored Jeep parts and the dealers are aware of this so they raise the prices. By the way the cams are awsome when you get them in, and add a bigger tb and you will love it!!!!
Andrew
|
gps_jetskier
Dodge Dakota
JOIN HERE
5/19/2003
07:53:46
| RE: KRC HO Cams
IP: Logged
Message:
Andrew,
Did you ever run just the cams by themselves?
|
Chris
Dodge Dakota
JOIN HERE
5/19/2003
14:24:19
| RE: KRC HO Cams
IP: Logged
Message:
I did, cams alone felt a LOT better than cams and intake... I honestly almost swapped my stock intake back...
Chris
|
gps_jetskier
Dodge Dakota
JOIN HERE
5/19/2003
14:38:35
| RE: KRC HO Cams
IP: Logged
Message:
Thanks Chris. Just ordered the HO cams with out the intake. Also got a 180 stat. Gonna port the TB with a friends CNC mill.
|
Skeletor86
Dodge Dakota
JOIN HERE
5/21/2003
07:58:05
| RE: KRC HO Cams
IP: Logged
Message:
What kind of gas milage difference did you guys see with the cams?
|
Chris
Dodge Dakota
JOIN HERE
5/21/2003
08:20:59
| RE: KRC HO Cams
IP: Logged
Message:
Cams alone seemed up a bit (maybe 1 mpg). I had only cams for about 500 miles (1 week) before I put on the intake manifold though...
Chris
|
Skeletor86
Dodge Dakota
JOIN HERE
5/22/2003
11:04:14
|  RE: KRC HO Cams
IP: Logged
Message:
So you are getting 30 MPG now right? Haha, but what would you say your are getting about? And do you have the 4.7 with the auto or 5 speed, and is your 4x4 or 2 wheel, and which rear end. I might be able to talk the wife into the group buy price, but it would be some fancy foot work if I do.
|
gps_jetskier
Dodge Dakota
JOIN HERE
5/22/2003
11:10:19
| RE: KRC HO Cams
IP: Logged
Message:
Just got a good deal from Ryan on these. Give him a buzz - Ryan Fortner (v8Performance.com)
GPS_JETSKIER
01' Quad, 3"PA Body Lift, 285/75R16 BFG AT
SS Nerfs
Line-X
Custom Safari Rack
Custom Prerruner Bar
|
Chris
Dodge Dakota
JOIN HERE
5/22/2003
11:30:26
| RE: KRC HO Cams
IP: Logged
Message:
My mileage went from about 16 to about 17 on my 2000 2wd 5-speed CC dakota with 200# of stereo and the 3.92 rear end... with a heavy foot...
Chris
|
Andrew
Dodge Dakota
JOIN HERE
5/23/2003
03:20:25
|  RE: KRC HO Cams
IP: Logged
Message:
My mileage is about the same, around 16.5-18 is what I average, but I am heavier and have 4x4 with 3.55's. I am sure I would get better if I could stay out of it all the time but it is too fun with the cams and the Fastman 68mm on there not to be to the floor.
later,
Andrew
|
Blu
Dodge Dakota
JOIN HERE
5/25/2003
20:16:00
| RE: KRC HO Cams
IP: Logged
Message:
Have a Dodge Ram with a 4.7 in it , and was wanting to install the Jeep H.O. intake and cams. My question is , what about the stock pcm? Will it compensate, or will it need a program change? If so, how do I locate the correct program, and how do I get it installed? The local dealership is totally useless when talking about performance upgrades, and I can't find any knowledgable people who could give me a correct answer. I have already done the standard cat-back exhaust/ air intake / headers/ etc. and was a little dissapointed. I have seen a lot of Dakota guys who have made this conversion, and was looking to them for help.
|
Andrew
Dodge Dakota
JOIN HERE
5/26/2003
01:54:23
| RE: KRC HO Cams
IP: Logged
Message:
Don't worry about your computer, you don't have to change anything. If you do the cams yourself, just wait till everything is done, then pull the neg battery cable off and then turn the key in the ignition to start and hold it there for 10-20 sec. After that put the neg cable back on and you're done. You just reset the computer to "learn" your new parts. That is all there is to it. I would highly reccomend a bigger throttle body with the cams also, if you don't have one already. Get something like a Fastman 68mm, that will make the biggest improvement along with the cams.
Later,
Andrew
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
