| From | Message |
Frog
Dodge Dakota
JOIN HERE
5/10/2003
11:16:44
|
 Subject: Losing POWER?
IP: Logged
Message:
I went and Dyno'd my truck again after adding some thing's, and here is what happened.
BEFORE
276.2 TQ
263 HP
I then added 21lb injectors, 4.10 gears and trac-loc. I also got rid of the K&N GEN II filter and went with a stage III INTENSE PERFORMANCE. I also added a Split Sec controller, and I went from a 255/50/17 too 275/55/17. (27' tire to 29' tire).
Now I have these numbers.
AFTER
253 HP
255 TQ
WTF happened?
Thanks,
FROG
|
Daksmack
Dodge Dakota
JOIN HERE
5/10/2003
11:50:25
|  RE: Losing POWER?
IP: Logged
Message:
Was the weather different?
I didnt do any clacs but did the taller tires take away form the 4.10,s?
Was there time for the PCM to learn the mods?
Just food for thought.
|
Buddy
Dodge Dakota
JOIN HERE
5/10/2003
13:15:43
| RE: Losing POWER?
IP: Logged
Message:
It's the gears. Lower gears will make your dyno #s worse.Read it in a magazine.
|
Frog
Dodge Dakota
JOIN HERE
5/10/2003
14:23:22
| RE: Losing POWER?
IP: Logged
Message:
I had 3:55's and 27" tire's and then changed to 4:10 and 29.1" tires. Stock was 28" tires. My calc was that by going to 27" with stock gears, my ratio was 3.64's and now by going to 29" tires and 4.10's, I should be in the 3:90 range. I don't understand.
Culd the tranny be killing it?
FROG
|
kota on 20s
GenIII
5/11/2003
00:35:19
| RE: Losing POWER?
IP: Logged
Message:
maby its running too rich. did you do a AF reading on the dyno?
~Eric
Single cam, non-VTEC
|
FROG
Dodge Dakota
JOIN HERE
5/11/2003
20:11:30
| RE: Losing POWER?
IP: Logged
Message:
yes 12.8
|
kota on 20s
GenIII
5/11/2003
23:48:46
| RE: Losing POWER?
IP: Logged
Message:
for a NA application, shouldnt it be around 14:1?
~Eric
Single cam, non-VTEC
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
