| From | Message |
chris
Dodge Dakota
JOIN HERE
4/29/2003
00:00:33
|
 Subject: v6 manual tranny fit v8?
IP: Logged
Message:
i have a v6 five speed transmission. will the transmission fit on the v8 and work as well as the five speed transmissions on v8? is it as tough?
|
juniork
Dodge Dakota
JOIN HERE
4/29/2003
00:11:54
|  RE: v6 manual tranny fit v8?
IP: Logged
Message:
should be the same transmission, the 3.9L is the same bellhousing bolt pattern as the 273, 318(5.2), 340, and 360(5.9).
|
chris
Dodge Dakota
JOIN HERE
4/29/2003
00:24:20
| RE: v6 manual tranny fit v8?
IP: Logged
Message:
that is not really what i need to know.i want to know if the v6 5 speed tranny will work with a v8. i heard some rumors that the 5 speed transmission that came with the v8 is different than the one that came with the v6.
|
b1llyw
DakotaEnthusiast
4/29/2003
06:08:31
| RE: v6 manual tranny fit v8?
IP: Logged
Message:
The Magnum V6 (until 2000) came with the AX15 tranny. Since, then it comes with the NV3500 tranny (same as V8). Either one will technically bolt up to a 318 or 360, but the NV3500 is better suited for the application.
Bill White
2002 QC 4x4, SLT , 4.7, 5 spd, 3.92 LSD
1995 CC 4x2, SLT, 318, 5 spd, 3.55 LSD
|
Daktrep9298
Gen II
4/29/2003
08:27:24
| RE: v6 manual tranny fit v8?
IP: Logged
Message:
Have to check with the dealership and see what tranny you have first. I have a 92 V6 with 5 speed tranny and I have the NV3500 which is the same one that comes with the V8. I would check which transmission you have, if it's the NV3500 it will work with the V8.
Hope this helps
Dan
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
