| From | Message |
Buddy
Dodge Dakota
JOIN HERE
4/07/2003
20:20:12
|
 Subject: 1/4 mph
IP: Logged
Message:
For the guys out there w/ R/Ts who are running 96 in the 1/4 or remember their e.t.s when they ran 96mph, will you please post the e.t.s
Having traction problems while running the GTech and wanna see what type of e.t.s I'm capable of w/ the mph I'm getting.Thanks, all.
|
MikeE
Dodge Dakota
JOIN HERE
4/07/2003
22:55:33
| RE: 1/4 mph
IP: Logged
Message:
Take a look at my web site and see my videos of my runs:
http://www.t-bolt.org/Mike/_pages/dodge/mods.htm
MikeE
|
Buddy Jones
Dodge Dakota
JOIN HERE
4/08/2003
01:25:19
| RE: 1/4 mph
IP: Logged
Message:
I'm having problems with traction(tire spin till 30 mph)
Times:15.4x at 95.xx
15.40 at 96.xx
See the problem?
|
POWER HUNGRY
Dodge Dakota
JOIN HERE
4/08/2003
15:13:37
|  RE: 1/4 mph
IP: Logged
Message:
Most of the guys I have seen running that mph are in the 13.8-14.2 et zone.
|
Buddy
Dodge Dakota
JOIN HERE
4/08/2003
16:19:39
| RE: 1/4 mph
IP: Logged
Message:
I didn't expect those numbers, I haven't got heads, cam, M1, tb, roller rockers, supercharger or nitrous.This is what I do have:under and upperdrive pulleys, MSD Superconductor plug wires, JBA equal length headers, Flowmaster 2 into 1 w/Gibson pipes, homebrew K&N intake, and Jet Stage II, IAT sensor relocated, and 180 deg. thermostat.
What should a blower with say #9lbs. and a set of 26x10.5x15 slicks do those numbers?
|
HSKR
Dodge Dakota
JOIN HERE
4/08/2003
16:25:46
| RE: 1/4 mph
IP: Logged
Message:
The G-tech consistantly will read at least 3mph higher than what you will run mph wise on the track. What mods do you have done to it?? I woudl bet you probably have a mid to high 14 sec truck with traction. Also, with more traction and less spinning, the mph will actually drop as well.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
