| From | Message |
slow r/t man
Dodge Dakota
JOIN HERE
4/05/2003
16:34:19
|
 Subject: Shaved heads
IP: Logged
Message:
Anyone here ever shave their heads for more compression.? I plan on installing a M1 and cam this summer and thought that might be a good addition. Maybe .030 or so. Also does anyone know of any head gaskets that may be thinner?
thanks
|
big_torque
Dodge Dakota
JOIN HERE
4/06/2003
00:22:47
| RE: Shaved heads
IP: Logged
Message:
Ive heard of it. I think someone on the Delfi board had theirs milled .025 That might shorten your pushrod length too. May have to get special ones.
I think the Cometic MLS (multi layer steel) are about the thinnest head gaskets you can get. I heard those Cometic gaskets are awesome but are hard to get them to seal right.
good luck :-)
|
Evil Doer
Dodge Dakota
JOIN HERE
4/06/2003
07:55:54
| RE: Shaved heads
IP: Logged
Message:
Nope. Full head of hair.
|
BASIC_SPEED
Dodge Dakota
JOIN HERE
4/06/2003
11:40:59
| RE: Shaved heads
IP: Logged
Message:
I am waiting for my magnum heads to get done.
I had them milled .030 also had them ported and polished. I had the intake ports mached also.
The first ting I did was upgrade the computer
to be abile to handle the better air flow.
All this should be completed by wed. I will check back then if your interested.
|
afi360
R/T
4/07/2003
02:35:06
| RE: Shaved heads
IP: Logged
Message:
evil doer- i thought the same thing when i read it LOL...guess with all this racist crap around its easy to get sidetracked by skinheads and whatnot.
anyway, cometic is the way to go for any special head work and the like...good luck.
|
Buzz
Dodge Dakota
JOIN HERE
4/07/2003
13:46:40
| RE: Shaved heads
IP: Logged
Message:
note with milling the heads... there is a chance that the intake manifold won't fit properly as you will change the bolt placement etc... you might have to get the intake modified to fit...
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
