| From | Message |
slow r/t man
Dodge Dakota
JOIN HERE
3/27/2003
18:27:27
|
 Subject: Mopar RT Heads
IP: Logged
Message:
What valve springs do the R/T heads come with??
|
Buzz
Dodge Dakota
JOIN HERE
3/28/2003
13:48:28
| RE: Mopar RT Heads
IP: Logged
Message:
none, they come bare from mopar... you can get complete heads from different people... and it depends on if they have been ported, which valve size, and what lift cam/rocker combo you want to run.. there isn't really a "stock" size for them...
|
Billy
Dodge Dakota
JOIN HERE
3/28/2003
13:59:28
| RE: Mopar RT Heads
IP: Logged
Message:
P5007145 head is assembled, which means it comes with valve springs... I believe that is his question. Thanks for playing, please try again.
|
slow r/t man
Dodge Dakota
JOIN HERE
3/28/2003
22:29:02
| RE: Mopar RT Heads
IP: Logged
Message:
Let me ask the question again. What valve springs do these heads come with
P70085 Magnum R/T cylinder head-assembly with
2.02" intake/1.65" exhaust valves (each) $595.00
Don't reply to this unless you have pertinant information.
|
bernd
*GenIII*
3/28/2003
22:35:19
| RE: Mopar RT Heads
IP: Logged
Message:
I believe the P/N# is: P5249464. They're rated up to .520" lift.
1997 Dodge Dakota SLT - V6
Supercharged/Intercooled @ 10# w/Nitrous
14.55 @ 96.01mph
|
bernd
*GenIII*
3/28/2003
22:44:55
| RE: Mopar RT Heads
IP: Logged
Message:
Here's the info on the heads:
P5007140: Cast Iron Head Bare Casting (1.92 Int. - 1.625 Ex.)
P5007141: Cast Iron Head Bare Casting (2.02 Int. - 1.625 Ex.)
P500145: Cast Iron Head Assembled (1.92 Int. - 1.625 Ex.)
P5249464: Magnum "R/T" Valve Springs - Up to .520" lift (Not the stock 5.2/5.9L springs found on the factory cylinder heads)
P4876062: Magnum Race Hi-Lift Valve Springs (Up to .600")
1997 Dodge Dakota SLT - V6
Supercharged/Intercooled @ 10# w/Nitrous
14.55 @ 96.01mph
|
slow r/t man
Dodge Dakota
JOIN HERE
3/29/2003
10:01:51
| RE: Mopar RT Heads
IP: Logged
Message:
Thank you
|
EyeTrip
R/T
3/30/2003
03:33:22
| RE: Mopar RT Heads
IP: Logged
Message:
Do any R/T heads come without valve guides? Mine did and I have never seen that before. The funny thing is mine have 32k miles on it and no sign of wear. I just got done with a lower end replacement and a mild polish job on the heads. And they are the true 2.02 heads.
Powerdyne 6#, MP Headers, Transgo shit kit, MSD/BTM ignition, MAP tweak, relocated IAT, MP PCM, "409" taylor plug wires, Keith Black Pistons, 5140 I-beam rods, polished head bowls. MONEY PIT!!
|
Buzz
Dodge Dakota
JOIN HERE
3/31/2003
14:14:39
| RE: Mopar RT Heads
IP: Logged
Message:
I assumed you were looking for the 2.02 heads that don't come assembled.. sorry
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
