| From | Message |
bakindak
Dodge Dakota
JOIN HERE
3/23/2003
22:21:19
|
 Subject: what intake for a 91 5.2L
IP: Logged
Message:
I want to put a preformance intake on my 91 5.2L, but I dont know what I should go with, if anyone has a good suggestions it would be appreciated
|
91DakotaFreak
Dodge Dakota
JOIN HERE
3/24/2003
09:55:09
| RE: what intake for a 91 5.2L
IP: Logged
Message:
are you converting it to carberated??? otherwise i dont think that they make anything for the 91 daks if you find anything let me know
|
rtdkota
R/T
3/24/2003
09:58:23
| RE: what intake for a 91 5.2L
IP: Logged
Message:
Being the 91 LE V8 (I had one, first dakota) is a standard LA-318 motor, with EGR- throttle body FI... you could run a single plane M1 intake (possibly having to make an adapter for your throttle body)... Definately possibilities. Not sure how your smec (PCM, but without the P) would handle changes--- one way to find out! ;)
Sam
www.socaldakota.com
|
Brad
Dodge Dakota
JOIN HERE
3/24/2003
11:46:45
| RE: what intake for a 91 5.2L
IP: Logged
Message:
Any pre mag small block intake will work. I would try the edelbrock airgap performer. I believe they make one with the egr connections.
|
Brad
Dodge Dakota
JOIN HERE
3/24/2003
11:49:52
| RE: what intake for a 91 5.2L
IP: Logged
Message:
Sorry I lied! The Air Gap doesn't have provisions for the EGR.
|
bakindak
Dodge Dakota
JOIN HERE
3/25/2003
04:05:01
| RE: what intake for a 91 5.2L
IP: Logged
Message:
well I was looking around 91DakotaFreak and I did find an entire intake setup for 91 and earlier engines, Performer RPM Pro-Flo EFI by edelbrock, looks interesting, gonna see if my local preformance shop can get that or not
|
91DakotaFreak
Dodge Dakota
JOIN HERE
3/25/2003
09:48:00
| RE: what intake for a 91 5.2L
IP: Logged
Message:
sweet keep me updated on what you find out! What kind of gains are they saying youll get with that setup
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
