| From | Message |
Jim
Dodge Dakota
JOIN HERE
3/22/2003
13:14:46
|
 Subject: M1 Install Problems Help!!
IP: Logged
Message:
Installed the M1 manifold on my 2000 R/T and I can not get my truck to blow hot air threw the heater. I do have the 180 t-stat but the air is so cold that it feels like my a/c is on. Any help would be appreciated.
|
Wesley
Dodge Dakota
JOIN HERE
3/22/2003
18:31:06
| RE: M1 Install Problems Help!!
IP: Logged
Message:
Did you remember to install a thermostat? I know it sounds basic but I have seen it happen. It will cause the truck to run very cool and therefore not have hot air.
Wesley
'01 Silver R/T
|
Jim
Dodge Dakota
JOIN HERE
3/23/2003
10:33:35
| RE: M1 Install Problems Help!!
IP: Logged
Message:
Yes I have the 180 and it also seems to be leaking antifreeze now...im not sure whats going on.
|
dodgeboy
Dodge Dakota
JOIN HERE
3/23/2003
12:15:51
| RE: M1 Install Problems Help!!
IP: Logged
Message:
one of the heater hoses runs to a port on the intake manifold..ya remember to hook that back up?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
