| From | Message |
Carter
Dodge Dakota
JOIN HERE
3/20/2003
20:45:17
|
 Subject: Hesitation
IP: Logged
Message:
I have a 95 Dakota with a 5.2 and 5 speed, I have the mopar 272/278 cam and mopar headers, computer, high flow cat and complete 3 inch exhaust with 40 series flowmaster. It idles at like 450 rpm and it is real bad hesitant from there. If you bring it up to about 650 or 700 and then hit it, its smooth and revs fast. The cam is a little loopy but I don't think that is causing it, has any one got an idea on how to fix this.
Thanks
|
carter
Dodge Dakota
JOIN HERE
3/21/2003
13:08:55
|  RE: Hesitation
IP: Logged
Message:
?????????????????????
|
Chris
Dodge Dakota
JOIN HERE
3/21/2003
13:18:01
| RE: Hesitation
IP: Logged
Message:
Just drive it like you stole it above 1200 RPM... I have no idea but it is probably that the idle is set too low.. is there an adjustment screw on the TB on the 5.2?
Chris
|
Carter
Dodge Dakota
JOIN HERE
3/21/2003
20:00:14
| RE: Hesitation
IP: Logged
Message:
there is an adjustment screw but when i turn it the idle speed motor just keeps adjusting for it. I don't know if there is a way to set the idle up without flashing the computer.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
