| From | Message |
darcy
GenIII
3/05/2003
15:08:47
|
 Subject: Hey NitousSteve!
IP: Logged
Message:
Hey, I was looking at your pics on your DodgeTruckWorld.com gallery and I have some questions about your fan shroud. I've been thinking of painting mine and since I saw yours I'm pretty sure that I will. How did you do it? You pulled it off right? or did you just mask everything off and spray? Is it just regular spray paint and did you use a clear coat afterwards? Are you happy with the results and have there been any problems with it? Is there anything I need to be careful of when removing it? Sorry for all the questions! Just want to make sure I don't wreck anything when I try it... Thanks again. Sweet truck by the way!
2002 Dakota Sport 4.7 V8 Club Cab
|
darcy
GenIII
3/05/2003
20:21:22
|  RE: Hey NitousSteve!
IP: Logged
Message:
You around man? Or anyone else that can help??
2002 Dakota Sport 4.7 V8 Club Cab
|
darcy
GenIII
3/05/2003
23:50:18
|  RE: Hey NitousSteve!
IP: Logged
Message:
oops, not nitous, I mean nitrous...
2002 Dakota Sport 4.7 V8 Club Cab
|
nitroussteve
DakotaEnthusiast
3/06/2003
01:15:21
|  RE: Hey Nitroussteve!
IP: Logged
Message:
ok,i painted the shroud on the truck.i just covered everything up,and taped it off.but,i you can take it off,it would make painting it easier.
you could just cover everything ,and do it on the truck.i used a metallic charcoal grey bumper and trim paint.no clear.it is fine,and i did that about 2 years ago.the duplicolor metalcast siver metallic basecoat would look awesome,i used it on some interior plastic trim.you do not have to prep the plastic,just spray.the best results come from cleaning the snot out of it!soap/water.use a light first coat,and a light second coat.then shoot it.should come out fine.good luck!
www.dodgetruckworld.com/nsperformance/
|
darcy
GenIII
3/06/2003
01:59:11
| RE: Hey NitousSteve!
IP: Logged
Message:
Great, thanks for the help!
2002 Dakota Sport 4.7 V8 Club Cab
|
nitroussteve
DakotaEnthusiast
3/06/2003
14:58:04
|  RE: Hey NitousSteve!
IP: Logged
Message:
your welcome,not a problem.
www.dodgetruckworld.com/nsperformance/
|
SodaPopinski
Dodge Dakota
JOIN HERE
3/07/2003
02:32:23
| RE: Hey NitousSteve!
IP: Logged
Message:
Yo, Steve since you are here, I want one of your intakes. Let us know what we need to do to get one.
|
nitroussteve
DakotaEnthusiast
3/08/2003
02:55:13
| RE: Hey NitrousSteve!
IP: Logged
Message:
shoot me an email.let me know what you want,what engine vehicle specs.i am currently building a garage at my house.so i took a break from making.
i am going to start them up again soon.thanks for the interest!
ns
www.dodgetruckworld.com/nsperformance/
|
darcy
GenIII
3/08/2003
16:14:17
| RE: Hey NitousSteve!
IP: Logged
Message:
Hey Steve, in some of the pics on your site there are some yellow hoses... can't really tell what they are hooked up to though... bleed valves maybe? What are they for and where do they go? I'm looking for some more engine detailng/dress-up ideas for this summer and those would look awesome with braided steel lines...
2002 Dakota Sport 4.7 V8 Club Cab
www.dodgetruckworld.com/darcy/
|
nitroussteve
DakotaEnthusiast
3/08/2003
23:54:44
| RE: Hey NitousSteve!
IP: Logged
Message:
replaced some factory hoses with them.got tired of the yellow and out they went.they were silicone hoses,come in diff. colors and can be had from several places.i like the steel braided race look best.
www.dodgetruckworld.com/nsperformance/
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
