Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
03:03:20 - 12/29/2024

Dakota Performance
FromMessage
aggie98
Dodge Dakota
JOIN HERE
 Email

3/05/2003
12:40:31

Subject: The ever popular exhaust question
IP: Logged

Message:
Ok guys here we go:
Current situation: I have a flowmaster 70 series si/do with 2.25 pipes out the rear. 70 series is not loud enough for me, almost sounds muffled,probably due to the 2.25 pipes not being mandrel bent and the bends being constrictive. Not loud enough outside, but like the very minimal drone inside.......moving on.

Upcoming situation: I am wanting to replace the exhaust with a si/so muff and go back to the 3" single pipe like stock.
I have narrowed my choices to 3 mufflers:Magnaflow, MBRP, or Spintech.
Ford guys seem to love Magnaflow, Dakota guys with the 4.7 rant and rave about the MBRP, and anyone that loves that muschle car sound seems to love the Spintech, though they say it has a very unique sound, deep and raspy or tinny.

Heres where I need you guys: If you have any experience with these 3 mufflers, please let me know things like interior noise, how loud outside, would you buy again, etc. However, these are the 3 I have narrowed to, so please dont try to sell me on Flowmaster again .

Thanks a million in advance.


2003 1500 Q/C 4.7 SLT
Dark Garnet Red
Adjustable Pedals!!!!!!
70 Series Flowmaster w/duals




Hurl
Dodge Dakota
JOIN HERE
 Email

3/05/2003
13:07:10

RE: The ever popular exhaust question
IP: Logged

Message:
I had a si/so magnaflow put on my '03 4.7 and it sounds GREAT. Nice rumble, has the sound of authority without being obnoxious.

I opted to keep the the factory pipes as they are CRES (stainless), just had the muffler boys remove the factory muffler and splice in the magnaflow.



aggie98
Dodge Dakota
JOIN HERE
 Email

3/05/2003
13:12:41

RE: The ever popular exhaust question
IP: Logged

Message:
What size magnaflow did you go with? Was it oval or round?



Greg D.
Dodge Dakota
JOIN HERE
 Email

3/05/2003
13:52:32

RE: The ever popular exhaust question
IP: Logged

Message:
I have a si/so Dynomax, which apparently sounds the same as Magnaflow, and I love the sound as well. Not annoying inside, but loud outside when you want it to be. Hope that helps!

Greg



Donny
Dodge Dakota
JOIN HERE
 Email

3/05/2003
16:27:18

RE: The ever popular exhaust question
IP: Logged

Message:
I put a spintech on my 3.9, kept factory pipes. Very pleased with the muffler; has a nice low rumble in the cab, loud but not obnoxious outside, and yes, many people think the truck has a v-8. The muffler is well made and the company was very helpfull in selecting the right model.



aggie98
Dodge Dakota
JOIN HERE
 Email

3/05/2003
17:01:21

RE: The ever popular exhaust question
IP: Logged

Message:
Remember what model Spintech?




Donny
Dodge Dakota
JOIN HERE
 Email

3/06/2003
07:10:39

RE: The ever popular exhaust question
IP: Logged

Message:
Sorry, no I don't. I do remember that I called them to order one thing and after talking to them they advised I buy another model.(actually cheaper than what I was going to buy) Go to spintech.com and get some more info and their phone number, then give them a call.



xplikt
GenIII
 User Profile


3/06/2003
11:32:31

RE: The ever popular exhaust question
IP: Logged

Message:
Let me put it this way. I like the MBRP muffler's sound so much I just ordered a universal one for my RX-7. I know it will be able to take the heat from the rotary too, MBRP has excellent quality work.

-Mike
http://www.dodgetruckworld.com/xplikt/
2002 2WD RC SLT 4.7L 5spd 3.92 LSD
MBRP Single in/out | straight piped 3rd cat | turndown tip
Full Hotchkis (bars, springs, shocks) and RAS
Shaved emblems and antennae
150BM fan | removed clutch | HD Radiator

MOPARornoCAR
Dodge Dakota
JOIN HERE


3/07/2003
12:22:06

RE: The ever popular exhaust question
IP: Logged

Message:
did you ever consider a flomaster muffler?????
they make a very loud ,cheap constructed inside and out muffler.
actually this was a post i was wanting too see.
i am looking too do the same too my 5.9 2001 dakota
but you all say stock tail pipe is 3 inches?????mine dont seem that big ..its still factory tailpipe...did i get ripped from daimler chrysler????
thanks
B>



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.