| From | Message |
Hoss318
Dodge Dakota
JOIN HERE
3/04/2003
15:04:26
|
 Subject: Tq specs for 4.7???
IP: Logged
Message:
I'm about to install my HO cams/intake (finally) and I need the torque specs for the intake manifold and valve covers.... anyone know 'em?
Thanks,
R/Trottmann
|
Hoss318
Dodge Dakota
JOIN HERE
3/06/2003
00:13:03
| RE: Tq specs for 4.7???
IP: Logged
Message:
Someone out there has to know.... please...
R/Trottmann
|
Hoss318
Dodge Dakota
JOIN HERE
3/06/2003
00:13:44
| RE: Tq specs for 4.7???
IP: Logged
Message:
Someone out there has to know.... please...
R/Trottmann
|
dodgetomahawk
Dodge Dakota
JOIN HERE
3/06/2003
00:40:11
|  RE: Tq specs for 4.7???
IP: Logged
Message:
here are the numbers taken from my service manualas follows.
intake manifold bolts 105 (INCH)lbs
cylinder head cover bolts 105 (INCH)lbs
camshaft bearing cap bolts 100 (INCH) lbs
non oil- camshaft sprocket bolt 90 (FT)lbs
|
Demon Dakota
DakotaEnthusiast
3/06/2003
15:06:49
| RE: Tq specs for 4.7???
IP: Logged
Message:
Yeah...what he said :)
K&N Drop in AF (CAI during summer months)
True Dual exhaust and removed third cat
HO Cams & HO Intake
FASTMAN 70mm TB
Autolite 3923 Plugs
TPS @ .76 VDC
IAT Adjuster Mod
14.52@94.2 MPH at Silver Dollar Raceway
|
dodgetomahawk
Dodge Dakota
JOIN HERE
3/06/2003
16:08:17
|  RE: Tq specs for 4.7???
IP: Logged
Message:
I like the Hughes Engine camshaft for 4.7 # HER 0820T. WWW.HUGHESENGINES.COM... more intake and exhaust duration at (0.50) than H.O. and Lobe seperation close to stock.Just my opinion.
|
Demon Dakota
DakotaEnthusiast
3/06/2003
17:20:50
| RE: Tq specs for 4.7???
IP: Logged
Message:
I bet those won't help you pass emissions though...
K&N Drop in AF (CAI during summer months)
True Dual exhaust and removed third cat
HO Cams & HO Intake
FASTMAN 70mm TB
Autolite 3923 Plugs
TPS @ .76 VDC
IAT Adjuster Mod
14.52@94.2 MPH at Silver Dollar Raceway
|
dodgetomahawk
Dodge Dakota
JOIN HERE
3/06/2003
18:20:36
| RE: Tq specs for 4.7???
IP: Logged
Message:
i plan on callin hughes for that very question... but krcperformance has a cam with 206 intake and 112 lobe seperation and they say that their cam is emmissions compliant.i dont like low lobe seperation for manifold vacuum though. ill find out what hughes says,they should know what they are talkin about all they do is build magnums.
|
conig
Dodge Dakota
JOIN HERE
3/06/2003
18:53:49
| RE: Tq specs for 4.7???
IP: Logged
Message:
what cam would preduce the most real world usable power? krc pr hughes.
just looking for an opinion.
|
Hoss318
Dodge Dakota
JOIN HERE
3/07/2003
11:33:26
| RE: Tq specs for 4.7???
IP: Logged
Message:
dodgetomahawk..... thanks for the info!
Other cams may make more hp or tq, but not for $80 each!!
R/Trottmann
|
dodgetomahawk
Dodge Dakota
JOIN HERE
3/07/2003
14:23:45
| RE: Tq specs for 4.7???
IP: Logged
Message:
your welcome hoss318 im just here to help everyone as much as possible with 4.7 as i can.good price on your cams....in regards to hughes cams,i just personally try to find max power,within emmissions if possible.i just got kennebell optimizer 2,quick turnaround on shipping and YES it does work and YES it is worth it.on the 45rfe trans it shifts quick and no slop,you go WOT,and it really pulls good.ill probally get 4.10 gears next,then super charge it.im runnin a 02 RAM SHORTBED.
|
Hoss318
Dodge Dakota
JOIN HERE
3/07/2003
22:45:25
| RE: Tq specs for 4.7???
IP: Logged
Message:
I want the KB flash, but I'm going to wait until I have my blower on, then flash it once, instead of flashing it now, then having to do it again. Really, the only thing I need/want is to get rid of the speed limiter. Plus, I shift on my own, no computer needed :-)
02 dak 5-spd.
R/Trottmann
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
