Forums
  Forum Tools
|
|
02:59:09 - 12/29/2024
Dakota Performance
From | Message |
Brad Dodge Dakota JOIN HERE
3/01/2003 13:07:34
|
Subject: Tune-up questions IP: Logged
Message: I have 99 RT CC with 75,000 mi. and probably way over due for a tune-up. It's my daily driver and I don't race it at all (except a few stoplights). I figure I should replace the plugs, wires, cap and rotor, and the belts. I change the PCV valve at every oil change (Mobil 1 every 3K). From the posts that I have searched I've concluded that the Autolite 3923's set to .40 are good. I'm unsure about the wires. I would like better than stock but not sure about the size. Taylor's seem to be popular. I would also want them fit like OEM so as not to have to due any mods with looms, etc if possible. The Borg-Warner Cap and rotor seem to be a popular choice as well. Suggested sizes and part no.s for all would be greatly appreciated. If there is anything else that should be taken care of while I'm taking care of the rest please let me know. The only mod I have is a home-brew intake. Thanks for any input.
|
Rob454 Dodge Dakota JOIN HERE
3/01/2003 23:52:47
| RE: Tune-up questions IP: Logged
Message: You dotn need to change the PCV every oil change.
As for plug wires i always liked Accell or MSD
Rob
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|
|