| From | Message |
maracs
Dodge Dakota
JOIN HERE
2/18/2003
06:35:42
|
 Subject: MP1 Manifold with Supercharger ??
IP: Logged
Message:
Hello all,
I have a 02 Dakota R/T. Plans are to run a Kenne Bell SC this spring. I wanted to start putting some other parts together so I can install them all at the same time.
Is it worth running the MP1 manifold with the supercharger? Kenne Bell tech says absolutely not. Any thoughts on this?
I am also planning on installing the crower 1.7 rollers rockers and maybe a F&B 52mm TB?
Any input would be great. Thanks
|
cbsdakota
*Mechanic*
2/18/2003
07:22:53
|  RE: MP1 Manifold with Supercharger ??
IP: Logged
Message:
Kenne Bell superchargers have most of their power off the line. If you install an M1 you will lose low end and gain at the top where the Kenne Bell can't go anymore. You would be better off going with a Vortech T-Trim or Paxton NOVI blower. These blowers create boost as the engine revs and the M1 would compliment that. Check out the Kenny Bridges truck under customer rides at www.krcperformance.com
97 Dodge Ram SS/T, black w/ silver stripes, Carsound cat and 40 Series Flowmaster
|
Shane
Dodge Dakota
JOIN HERE
2/18/2003
11:27:50
|  RE: MP1 Manifold with Supercharger ??
IP: Logged
Message:
you will have problems with KB if you put high clearence valve covers too, not shure if 1.7 rockers need more clearance or not
|
Buzz
Dodge Dakota
JOIN HERE
2/18/2003
12:29:43
| RE: MP1 Manifold with Supercharger ??
IP: Logged
Message:
I am doing this setup right now, Don't waste your $$$ on the M1 with the KB, it won't do anything. With the positive displacement SC the intake won't do much unless you are going to run it up above 6000 rpm. I would advise a set of 19 lb FMS injectors (the KB comes with 2 aux 58lb so you won't need any bigger ones) 1.7 rockers (or a cam depending on smog laws) I am going pretty wild on my setup (not going to use the OPT II at all) so if you have any ? feel free to email me, I will let you know what I am using for tuning etc.
mxblue23 @aol.com
|
Shane
Dodge Dakota
JOIN HERE
2/19/2003
00:45:48
| RE: MP1 Manifold with Supercharger ??
IP: Logged
Message:
What fmu are you gona use buzz? im planing on leaving the stock injectors and replacing the 2 aux with bigger ones, HKS fmu im getting will operate them independently.
|
snowman
GenIII
2/19/2003
01:30:03
| RE: MP1 Manifold with Supercharger ??
IP: Logged
Message:
I'm having a kennebell supercharger and M-1 installed this week I'll let you know on sat how it turns out.
Formerly Cadetdak
"This war will end at a time and place of our choosing"
president Bush
|
kota on 20s
GenIII
2/19/2003
13:57:12
| RE: MP1 Manifold with Supercharger ??
IP: Logged
Message:
instead of the 19lb injectors, you might want to look at the 21lb ones.
~Eric
Single cam, non-VTEC
|
snowman
GenIII
2/19/2003
17:02:56
| RE: MP1 Manifold with Supercharger ??
IP: Logged
Message:
I'm already running 24lbs injectors
Formerly Cadetdak
"This war will end at a time and place of our choosing"
president Bush
|
maracs
Dodge Dakota
JOIN HERE
2/19/2003
17:17:43
| RE: MP1 Manifold with Supercharger ??
IP: Logged
Message:
Thanks for all the input so far.
Snowman, I'm looking foward to hearing what your results are. Keep us posted.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
