| From | Message |
DBDAK
Dodge Dakota
JOIN HERE
2/01/2003
02:38:38
|
 Subject: ASE CHIP 4.7L
IP: Logged
Message:
Does the ASE chip really give a 2001 4.7 26HP and 33ft/pd TQ?? Does this chip work well with mods like cold air intake/exhaust,cams.. But that 26hp and 33TQ is rated at the fly so that wouldnt be a whole lot at the wheels would it? Anybody have the ASE on a 01 4.7, what mods do you have and how do you like the chip???
Thanks
DBDAK
01 CC 4.7 4x4 5spd 3.92ASD
4"homebrew w/9"K&N,3rd cat removed Dual outlett IronTuff 2 chamber performance muffler, JETII, 3923's,Ported 68mmTB,TPS@.72V,clutch fan conversion,Centerforce Dual Friction Clutch
|
Buddy Jones
Dodge Dakota
JOIN HERE
2/01/2003
14:10:09
|  RE: ASE CHIP 4.7L
IP: Logged
Message:
It'd be about 20 horses at the wheels.
|
texaslawdawg
Dodge Dakota
JOIN HERE
2/01/2003
18:56:17
| RE: ASE CHIP 4.7L
IP: Logged
Message:
I have the B&G Chrysler "flash" on my R/T, does anybody know if I can get the ASE chip installed without screwing things up. I see absolutely no gains from the flash.
|
Wes
GenIII
2/01/2003
18:56:42
| RE: ASE CHIP 4.7L
IP: Logged
Message:
Doesn't ASE rate their performance based on computer simulations and not actual dynos? I think they are the ones.
HO cams & intake, 70mm F&B, Z-tube, Borla headers, Gibson exhaust
|
Brad
Dodge Dakota
JOIN HERE
2/05/2003
02:16:46
| RE: ASE CHIP 4.7L
IP: Logged
Message:
does anyone know when hypertech will release a programmer for the 4.7
|
CThomp
Dodge Dakota
JOIN HERE
2/05/2003
08:07:03
| RE: ASE CHIP 4.7L
IP: Logged
Message:
No time soon for the hypertech and the we're all still kinda waitin on the ASE for some real dyno numbers. The only numbers anyone has seen give pretty much 0 h.p.
|
Texas Todd
Dodge Dakota
JOIN HERE
2/05/2003
08:37:29
|  RE: ASE CHIP 4.7L
IP: Logged
Message:
DB,
how about getting one, and doing a before and after dyno for us? It's all in the name of modding the DAK!
|
2THEXTRM
GenIII
2/05/2003
12:03:26
| RE: ASE CHIP 4.7L
IP: Logged
Message:
I would get one for dyno before/after results if they didnt have to hack a big hole into the side of it my ECU to install new chip, it would take the dealer about 5 seconds to notice that one and make a note of it in your on-line record.
Flowmaster cat back w/15 inch chrome tip, Volant Intake, Poweraid TB Spacer, Splitfire Plugs, full synthetic fluids
3 inch body/1.5 inch Block Lift, 305 70-16 X-Terrains on AR Terons, Pro Comp ES9000's
Grizzly double/single rollbar with (6) Hella's, Manik Nerfs, Line-X, Hard Work & $$$$$$$$$$
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
