| From | Message |
ROBERT
Dodge Dakota
JOIN HERE
1/25/2003
22:38:55
|
 Subject: Joe E. still here?
IP: Logged
Message:
hey joe i read your reply to a post a while back concerning a homebrew intake for the 1990 dak. you said that you made your own.would you mind sending me some instructions on how you do it, and some pictures if you have them.if anyone else knows how to do this can you tell me.
eightyfive58@yahoo.com
|
Joe E.
Dodge Dakota
JOIN HERE
1/26/2003
23:33:11
| RE: Joe E. still here?
IP: Logged
Message:
Hey man, yeahIm still here. Everyday most of the time.
Yeah I made a intake. Bought 3in PVC pipe. A 90 deg elbow, and a couple fernco connecters 3in of course. Simply took, starting at the stock air hat, removed the accorden tube. Took a fernco conn. and hooked it to the airhat and to a piece of 3in PVC. Ran that about a foot to the 90 deg elbow. Then another ft of PVC. And the 9in cone K&N filter on the front end. At the computer. I took the stock air tubes connector and gluded it to the second piece of PVC mentioned right at the same spot as the computer hookup. So it is connected as it was before. Ill try to dig up a pict. What your email? Later.
Joe E.
|
ROBERT
Dodge Dakota
JOIN HERE
1/26/2003
23:56:50
| RE: Joe E. still here?
IP: Logged
Message:
eightyfive85@YAHOO.COM
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
