| From | Message |
tweaked
Dodge Dakota
JOIN HERE
1/24/2003
11:12:45
|
 Subject: iat sensor
IP: Logged
Message:
i was wondering how do you move this? do you just take it off and move it closer, or do you need put a hole in the intake tube, i dont even know what this thing looks like, but it sounds like a good idea moving it, if someone could maybe send me pics or give me some idea how to do this it would be great thanx
dave
aut0maticai@aol.com
|
Texas Todd
Dodge Dakota
JOIN HERE
1/24/2003
11:25:04
| RE: iat sensor
IP: Logged
Message:
Some like the mod, others don't.
However, you move it FARTHER away from the TB, not closer.
I'm pretty sure that there is a good section on:
www.speadtweaks.net regarding the IAT and where it is on the different engines, and tips on relocating it.
Good luck.
|
Bil
Dodge Dakota
JOIN HERE
1/24/2003
11:56:26
| RE: iat sensor
IP: Logged
Message:
What year is your truck? I haven't looked at 2000+ trucks to know where they are but they are probably where they are on 97-99 trucks. On the passenger side, near the intake hose, down in the intake manifold you will see a sensor that is fed by 2 wires shielded a little in tubing. that is your AIT. Remove it and fill the hole with a threaded plug, I think it was 1/4 but check for sure on SpeedTweaks. I put mine in the rubber intake hose but I am working on a new custom mod for my truck that will improve my custom ram air intake. I will post pictures when I'm done.
|
Texas Todd
Dodge Dakota
JOIN HERE
1/24/2003
12:22:35
| RE: iat sensor
IP: Logged
Message:
Wow, that's nice, all engines and years are the same!-not
|
tweaked
Dodge Dakota
JOIN HERE
1/24/2003
14:41:37
| RE: iat sensor
IP: Logged
Message:
thanks alot guys and i have a 97, hope i like it, also texas, why do others say they dont like it, im kind of new to this whole modding trucks thing
|
Texas Todd
Dodge Dakota
JOIN HERE
1/24/2003
15:56:32
| RE: iat sensor
IP: Logged
Message:
tweak,
sometimes, as on the 01's +, and MIL lights(check engine) comes on when it encounters an unusual reading. Some say that it doesn't do any good, and even made their engine run poorly.
Others have dyno results of around 10HP gains! Really depends on the ambient temp, humidity, etc.
Did you find the excellent write up on the speadtweaks site regarding this?
|
Buddy Jones
Dodge Dakota
JOIN HERE
1/24/2003
20:57:27
| RE: iat sensor
IP: Logged
Message:
I would have my air intake tube threaded, and get a brass plug from Autozone to stick back in the intake manifold(only$.79).Real easy.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
